Blog

Thank you everyone for coming to our store and purchasing so many brand new PLACEBO surfboards!

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" Polyester Made in Japan Quality!

Mr. A, You have chosen LOST's "SUB DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ He purchased the SUB DRIVER 2.0 because his current board had outgrown him and was losing buoyancy. He had seen many pros riding LOST/MAYHEM boards on YouTube and was inspired to try them out. He came to our store wanting a board that suited his current level and weight, and we decided to get him a 5'8" size. Mr. B, You have chosen LOST "DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/37140/ He used to surf by changing the size of his performance boards and choosing the board that suited the wave conditions from several boards, but his weight had changed and he felt that some of the boards he had were not buoyant enough, so he purchased a 6'2" BRO dimension board as an all-around board. Mr. C said, You have chosen LOST's "SUB DRIVER2.0" Polyester Made In Japan Quality. https://www.luvsurf.co.jp/model/55395/ He is a heavy LOST user and has ridden a variety of models up until now. The last time he purchased the "DRIVER2.0", he was in very good condition, so he also purchased the "SUB DRIVER2.0" so that he could enjoy the same high-performance surfing even in low-power wave conditions. Mr. D You have chosen LOST's "SUB DRIVER2.0" Polyester KIRI-FLEX Made In Japan Quality. https://www.luvsurf.co.jp/model/55395/ As his current surfboard was getting old, he was considering purchasing a new one. He came to Love Surf after seeing a YouTube video of the LOST team enjoying stylish surfing on the LOST "DRIVER2.0" and "SUB DRIVER2.0." He's a very stylish and well-built guy, and is looking to further improve his surfing. After carefully considering the model and size, he finally decided on the "SUB DRIVER2.0" in BRO dimensions. It's a special board made with KIRI-FLEX, which is rare and produced in very limited quantities, so it was impressive to see how happy he was! Thank you for choosing Love Surf for your first new surfboard! Mr. E You have chosen LOST's "SUB DRIVER2.0" Polyester Made In Japan Quality. https://www.luvsurf.co.jp/model/55395/ He is a heavy user of LOST & PLACEBO. The other day, he crashed his favorite LOST California Twin LIGHT SPEED surfboard while practicing airs, so he came to our shop to get it repaired. He discovered a rare stock board, the LOST SUB DRIVER 2.0, that he had been interested in for a while, and made an immediate decision. "This will help me do well in the next contest!" he said enthusiastically! Everyone! Come visit us! Lots! Thank you for purchasing the new "LOST Surfboard" Polyester Made in Japan Quality!

Learn more

Thank you for visiting our store and purchasing the new PLACEBO Surfboard DURA-FLEX!

111 Mr. A, You have chosen the PLACEBO "RE LOADED" DURA-FLEX. This customer was switching from a 9-foot longboard. He was thinking of switching to a 7' board, but... I saw professional surfer Arashi Murata's YouTube channel and this board looked good, so I wanted to try it next. Since the 6'6" size is not available for mail order, the customer came to our store on a business trip from Osaka to purchase it. Mr. B, The customer chose PLACEBO's ``RNF-ULTRA'' DURA-FLEX. She came to Love Surf looking for a board that offered stability and power, but also offered better maneuverability and would help her improve her skills after switching from a longboard. The performance model was sized so that her husband could also enjoy it on tough days. The PLACEBO is impact-resistant and won't yellow from the sun, so you can enjoy it for years to come in beautiful condition, making it a great choice for years to come! Mr. C said, The customer chose the PLACEBO "RE LOADED" DURA-FLEX. He had been thinking about switching from a long to a mid-length board, but had seen many reviews on YouTube and social media saying that the "RE-LOADED" was easy to ride, so he came to our store. After seeing the actual board, he liked the solid volume and purchased the 6'6" size. Mr. D, The customer chose PLACEBO's "TABLET REDUX" DURA-FLEX. I had a POLY LOST classic "TABLET REDUX" but gave it away, The latest evolution of the same model was purchased from PLACEBO. The TABLET series has buoyancy, It was highly praised as a good board that moves well. Mr. E, The customer chose the PLACEBO "RE LOADED" DURA-FLEX. It seems that you own and ride many types of boards, including shortboards and noseriders. He came to our store looking for a board that was easy to ride, yet still had some length and allowed for nimble movement. The largest size, 6'6, was chosen so that he could ride the waves as easily as possible from the outside as soon as they started to break. Everyone! Come visit us! Lots! Thank you for purchasing the new PLACEBO Surfboard DURA-FLEX!

Learn more

Thank you to everyone who came to our store and purchased so many brand new LOST surfboards!

Mr. A, He chose the LOST "RNF'96" Resin Color & On Fin special board. He is a heavy Love Surf user, regardless of whether it's LOST or PLACEBO. He custom-ordered a LOST RNF'96 and is waiting for it to be completed, but this newly arrived LOST RNF'96 features Mark Stabaron's on-fins, Atsushi Yuri's resin color, and a wide dimension that we've never had in stock before, making it a special board in every way, so he made an immediate decision. Mr. A owns many surfboards, but when he saw the RNF'96 in person, he was so impressed by its high quality that he exclaimed with glee, "It's a shame not to ride it!" Mr. B, We selected LOST's "PARTY CRASHER" Resin Color Made in California, USA. This model was purchased so that it could be enjoyed in thick waves when the tide was rising and the waves were slack. He also owns the rare MAYHEM mid-length model "SMOOTH OPERATER." This is another mid-length model from MAYHEM that is popular and has limited stock. He also wanted to ride the "PARTY CRASHER." Mr. C LOST "RAD RIPPER" Polyester Made in California USA was chosen. After a long break, he recently returned to surfing with his old surfboard, but was frustrated that he couldn't catch any waves, so he came to Love Surf to find a surfboard that would help him regain his old sense of rhythm. After looking at Love Surf's website, he was interested in the LOST "SUB DRIVER 2.0," which was his first choice, but we recommended the LOST "RAD RIPPER," which has more buoyancy and is more user-friendly, and he decided on it. His eyes lit up as he said he would like to try the "DRIVER 2.0" once he regained his old sense of rhythm! Mr. D He chose LOST's "SUB DRIVER2.0" LIGHT SPEED Made in California USA. I'm Yuji, a staff member at Love Surf. The "DRIVER 2.0" I custom ordered last year is running really well, so this time I ordered a custom 5'8.5" size board in the cutting-edge EPS material "LIGHT SPEED" specification, which I heard goes well with the "SUB DRIVER 2.0." I've already ridden it, and it accelerates strongly with a soft, light movement and has incredibly high rotation performance. As I heard, it has the best performance in small and medium waves. Mr. E, We chose LOST's "POCKET ROCKET" Polyester Made in California, USA. He is a heavy Love Surf user who purchases dozens of boards a year, switching between different sizes and models to suit the waves. The POCKET ROCKET works best in larger waves, and can be used safely in deep, fast-breaking sections, so I custom-ordered my fourth POCKET ROCKET, a slightly longer 5'10.5". My impression was that it allowed for stable takeoffs even in deep, deep waves without getting lifted to the top. Everyone! Come visit us! Lots! Thank you for purchasing our new "LOST Surfboard"!

Learn more

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" Polyester Made in Japan Quality!

Mr. A, You have chosen LOST "DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/37140/ In northern Chiba, I spotted a LOST rider riding a DRIVER 2.0 with ease. I wanted to try out the DRIVER 2.0 myself, so I approached him and he introduced me to Luvsurf and came straight to our shop from the beach. He chose the 5'9 DRIVER 2.0. He said he thought he'd be able to surf well with this board. Mr. B, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/66971/ He has been using the SUB DRIVER 2.0 with great success, but now he wants the extremely popular and hard-to-find "RNF-96", so he received information on @LINE that a limited number of colored "5'5 RNF-96" had just arrived, and he purchased it. Mr. C said, You have chosen LOST's "SUB DRIVER 2.0" Kiriflex Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395 / He had been looking for a SUB DRIVER 2.0 and was considering purchasing one, but when he found out that Love Surf had just stocked a limited-edition Kirifkex model with a special Paulownia wood stringer, he came to visit us. The moment he picked it up, he said "This is definitely the one!" and immediately decided to buy the 5'7" SUB DRIVER 2.0 Kirifkex. Mr. D, You have chosen LOST's "RAD RIIPPER" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/39979/ He had been away on a business trip overseas for about 10 years and was unable to surf, and when he returned he was surprised to see that board designs had changed dramatically. He immediately purchased the cutting-edge "5'9 RAD RIIPPER." He said he wanted to try it out and see how it differed from the old designs. Mr. E, You have chosen LOST "DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/37140/ He had ordered a slightly longer 6'1 DRIVER 2.0 online for when he went up a size, but as swells were expected to arrive at his home beach in northern Chiba, he rushed to the store to pick it up so he could ride it as soon as possible. Even after touching the board in person, he was convinced that the outline, concave, and rail drop all meant that it would be a board that he would definitely enjoy riding on the day he went up a size. Everyone! Come visit us! Lots! Thank you for purchasing the new "LOST Surfboard" Polyester Made in Japan Quality!

Learn more

Thank you to everyone who came to our store and purchased so many brand new LOST surfboards!

Mr. A, He chose LOST DRIVER 2.0 LIGHT SPEED PROFORMANCE EPOXY. https://www.luvsurf.co.jp/model/37140/ He came to our store looking to add the DRIVER 2.0 for good waves to his current lineup. While carefully looking through the POLYESTER DRIVER 2.0 bikes in stock, he discovered that there was only one LIGHTSPEED bike made of high-performance EPS material left, and said, "If I miss this, who knows when I'll be able to get one again!", so he immediately decided to buy the 5'11 DRIVER 2.0 LIGHTSPEED. Mr. B, We chose LOST's "RAD RIPPER" POLY AIRBRUSH COLOR Polyester Made In California. https://www.luvsurf.co.jp/model/39979/ He came to our store because he was interested in the highly acclaimed all-around model "RAD RIPPER." While we were out of stock and most of the models were pre-ordered, he found a special edition model with airbrushed colors that had just arrived from the USA, and was captivated by the texture, so he purchased a 5'8" RAD RIPPER. Mr. C said, He chose LOST's "ROCKET REDUX" CARBON WRAP. https://www.luvsurf.co.jp/model/39906/ I was using a STEALTH XTR that I inherited, but it was starting to show signs of wear, so I decided to replace it. I'm not very good at PU boards, so I was looking for an EPOXY board similar to the STEALTH. As a woman and light weight, I wanted to maintain the speed of takeoff, but I was worried about choosing a size that would make dolphin-throughs difficult and not make control too heavy. I was able to balance my board preferences with the 5'7" size, which has slightly less bamboo buoyancy than my current board. Mr. D, He chose LOST's "ROCKET REDUX" CARBON WRAP. https://www.luvsurf.co.jp/model/39906/ He had just purchased a SUB DRIVER 2.0 the other day, but came to our store wanting a board that would perform better in smaller waves. He has been riding LOST boards for a long time and knew that the original ROCKET was in good condition, so he purchased a board in the store that was a good size, 5'7". Mr. E, He chose LOST's "SUB DRIVER 2.0" Polyester Made In California. https://www.luvsurf.co.jp/model/55395/ This person lives near the sea in Nishi-Showa. He owns a variety of surfboards, but after watching pro surfer Arashi Murata's YouTube videos, he decided on the SUB DRIVER 2.0, which looked very easy to ride even at his home spot! He was torn between MADE IN JAPAN QUALITY and MADE IN USA, but decided on the one made in California, where LOSTSurfboards is based. Everyone! Come visit us! Lots! Thank you for purchasing our new "LOST Surfboard"!

Learn more

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" Polyester Made in Japan Quality!

Mr. A, You have chosen LOST's "RAD RIPPER" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/39979/ The customer reserved and purchased the all-around and friendly RAD RIPPER in a slightly larger 6'0" size. Apparently the spots he frequently visits in Ibaraki get crowded in the summer, but he said that with this RAD RIPPER he'll be able to overcome the crowds and still catch some waves. Mr. B, You have chosen LOST's "SUB DRIVER2.0" KIRI-FLEX Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ The customer came to our store hoping to find a different size in stock since the CA TWIN he had purchased last time was in good condition. They were out of stock, but I saw this KIRI-FLEX "SUB DRIVER2.0" model in the store, which looked like it would work well. After seeing it, he thought, "This looks amazing!" and purchased the 5'9" PRO size. Mr. C said, You have chosen LOST's "SUB DRIVER2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ The first board he purchased was the "RNF-RETRO," which became his magic board, and he has since purchased a string of popular boards, including the "RAD RIPPER," "CA TWIN," and "RNF'96." He's also a huge Mayhem board fan, and this time he purchased the 5'8" PRO size, hoping to ride the Driver series favored by top pros. Mr. D, You have chosen LOST's "SUB DRIVER2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ He is currently using the LOST "DRIVER2.0" and is feeling good about it, so he purchased the "SUB DRIVER2.0" to use in small waves and conditions where the waves are less likely to break. When he came to the store, he was looking for the LOST "SUB DRIVER2.0" LIGHT SPEED, but luckily we had a stock board with the perfect size, a MADE IN JAPAN QUALITY "SUB DRIVER2.0," so he hesitated, but made the decision. Apparently, he hadn't ridden a surfboard in over 10 years, but thanks to his training, the "DRIVER2.0" was working really well, so it was very impressive to see him excited and eager to ride the "SUB DRIVER2.0" as well! No matter how many times you ride it, it's always nice to have a new surfboard! Mr. E, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/66971/ This customer placed a USA custom order with BLACK DART immediately after the RNF96 model was released, but couldn't wait for it to be completed and purchased a stock board. Because he frequently checks the website, he knew that stock boards have been restocked several times and quickly sold out, so he came to our store hoping that the appropriate size, 5'5", was still in stock, and was able to get his hands on one at the perfect time. Everyone! Come visit us! Lots! Thank you for purchasing the new "LOST Surfboard" Polyester Made in Japan Quality!

Learn more

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" Polyester Made in Japan Quality!

Mr. A, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. Recently, the customer has been riding point nose boards, but he has been interested in the RNF model for some time. Apparently he wanted to try it out. When he heard about the release of the RNF-96, he immediately reserved a 5'6" bike. Mr. B, LOST "SWORD FISH" Polyester Made in Japan Quality was chosen. I was using a performance board and was looking for a board that was a little wider and thicker. He came to the store without any particular model in mind, and the candidates he chose were the RNF-96 and SWORD FISH. He was unsure which one to choose, but he decided to purchase the 5'8" SWORD FISH as it felt good in the hand. Mr. C said, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. He is a big fan of the RNF model and has ridden almost all of the RNF models released by LOST, from the original RNF. When he heard about the release of the RNF96, he had given up on purchasing it because it was out of stock, but he made a reservation and purchased the latest version, 5'4". Mr. D, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. The customer came to our store looking for a new board because the one they were currently using was starting to wear out. I was looking for a board that was easy to ride because my weight had changed. I had previously ridden Shoki's RNF, so He purchased the 5'8" RNF96 model because he knows how much fun it is. Mr. D, You have chosen LOST's "SUB DRIVER2.0" Polyester Made in Japan Quality. After KEI KOBAYASHI won the JPSA, he became interested in LOST and wanted to ride them. The buoyancy of the board I'm using is low, so I've increased the volume a little to return it to a standard buoyancy so I can surf more easily. I selected the size 5'7 BRO dimension. Everyone! Come visit us! Lots! Thank you for purchasing the new "LOST Surfboard" Polyester Made in Japan Quality!

Learn more

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" Polyester Made in Japan Quality!

Mr. A, You have chosen LOST's "SUB DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ I often see it on various YouTube channels, and all the pros riding it seem to be in good shape. He said he wanted to try the Lost next time. He likes the design with volume around the nose. Instead of the "DRIVER2.0", he chose the "SUB DRIVER2.0" at 5'7". Mr. B, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/66971/ He is a veteran surfer with over 30 years of experience, and has even competed in competitions in the past. Until now, I have been using boards from my friends' shops and related businesses, We asked them to choose the surfboard they wanted to ride. I've ridden a few LOST boards and they all felt great, so The customer purchased the 5'7" RNF-96, saying it was a board he wanted to ride before he died. Mr. C said, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/66971/ This customer had been using boards from other brands for many years, but when he tried out the "DRIVER2.0" he was so impressed by the difference it had with his previous boards that he immediately switched to LOST boards. He had heard that we had a 5'7" RNF96 stock board in stock, but had never seen it in person, so he came to us for advice, but he made an immediate decision and came to our store. After seeing it in person, he really liked the design, including the balance of the rail thickness and the width of the tail. Mr. D, You have chosen LOST "RNF'96" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/66971/ Since purchasing the original RNF glass-on fin + FCS from Luvsurf over 20 years ago, This customer has been driving the RNF for a while. He said he would like to buy the RNF-96 when it is released and stock becomes available. He frequently visited the store to check if we had the appropriate size of 5'5''. Mr. E, You have chosen LOST's "SUB DRIVER 2.0" Polyester Made in Japan Quality. https://www.luvsurf.co.jp/model/55395/ The customer is a fan of Placebo's RAD DIABLO model, but wanted to try a board with better movement. He chose the stable 5'9 BRO DIM so that he could switch from a high buoyancy board without any discomfort. Everyone! Come visit us! Lots! Thank you for purchasing the new "LOST Surfboard" Polyester Made in Japan Quality!

Learn more

Everyone! Thank you for coming to our store! Thank you for purchasing so many brand new "LOST Surfboards" made in California, USA!

Mr. A, We chose LOST's "RNF-ULTRA" Polyester Resin Tint Color. The board he is currently using is wide, has a rounded nose, and is highly buoyant, but he doesn't feel that it takes off very quickly and is picky about the wave quality, so he was looking for a board that was long but not very wide. He found out about the RNF-ULTRA model on Love Surf's website and watched some riding videos before coming to the store to pick it up and was pleased that it was close to what he was looking for in terms of size and other features. Mr. B, LOST "SUB DRIVER 2.0" Polyester Performance series was selected. He owns many LOST surfboards, but recently has been using boards with more buoyancy such as RNF, and has gotten rid of four performance boards such as DRIVER. Recently, he borrowed a friend's DRIVER 2.0 model at the beach and decided he wanted a shortboard with a narrower nose, so he came to buy a new 5'9" Pro dim. Mr. C said, LOST "RAD RIPPER" Polyester Resin Tint Color has been selected. He was gradually reducing the buoyancy of his boards, but felt that they were too short, so he was looking for a board that would be easy to ride all around, even if he added length without changing the volume too much. His requirements were that it be fast and easy to move around, and the perfect model was the RAD RIPPER TINT board in gray, which suited his taste, and we also had the 5'8 size in stock, so he purchased it. Mr. D, He chose the LOST "RNF'96" Concept Airbrush 2nd Edition. He was currently riding a surfboard from another brand, but after several years of use he was concerned about the yellowing of his board, so he was looking for a new one. A friend recommended the RNF'96, and he came to Love Surf. We lined up two sizes of surfboards for him to consider, and after we explained to him that the RNF'96 is a model with good response and excellent maneuverability, so he would have no problem enjoying it even if he went up a size, he made the decision. He seemed very happy to have a new surfboard after such a long time! Mr. E, He chose the LOST "RNF'96" Polyester Half Opaque First Edition. We received a call from a customer who wanted to get their hands on this extremely popular and hard-to-find board right away, and we immediately decided to sell it. He drove all the way from Osaka where he was working away from home to come and pick it up at Love Surf. He is a LOST surfboard enthusiast who rides almost every one. Everyone! Come visit us! Lots! Brand new "LOST surfboard" Made in California, USA Thank you for your purchase!

Learn more