Check out the board shape design of the "SUB-DRIVER-JP" model, which has been featured continuously and is currently a hot topic, on the AKU software screen.
I don't usually make these public, but I'd like to show you the surfboard design screen from the AKU machine that I saved while developing the "SUB-DRIVER-JP" model with Mayhem.
This is the outline of the board. You can see that there is a gentle bump wing on the tail within the line from the widest point to the tail end on the top rail side of the screen.
If you slice the first 12 inches off the nose, you get this shape. Look at the curve of the bottom. There's an entry concave where the water first flows in when you start paddling or riding.
The shape is a slice of the widest part of the board. You can clearly see the unique Mayhem design's concave curve, which uses the entire bottom surface. You can also see the rail shape, which is slightly thinner than the original "sub-driver" model that inspired it. The deck center is the thickest part, and the dome-shaped deck shape curves roundly toward the rail edge.
If you slice it 12 inches from the tail end, it will look like this.
The volume of the tail rail becomes thinner and the edges become sharper!
Please take a look at the "SUB-DRIVER-JP" locker.
The bottom line is the rocker line, which is the most important part of a surfboard and determines its speed performance.
Mayhem is particular about which part of the line from the tip of the nose to the end of the tail will lift up.
Mayhem has incorporated a delightful design into the SUB-DRIVER-JP: a bottom rocker design that widens the sweet spot of the front stance to allow Japanese riders to have gentler control.
If I explain in too much detail, other shapers will copy it like the Quest series, so I'll leave it at that.
[SUB-DRIVER-JP model size lineup/appropriate weight]
5'10″ x 19 1/4″ x 2 3/8″ (178 x 48.9 x 6.0 cm) 65~73kg 28.6cl
5'11″ x 19 1/2″ x 2 7/16” (180 x 49.5 x 6.2 cm) 70~78kg 30.1cl
6'0″ x 19 3/4” x 2 1/2″ (183 x 50.1 x 6.35cm) 75~83kg 31.6cl
『SUB-DRIVER-JP』Price
■ POLYESTER ￥125,000 (excluding tax) / ￥131,250 (excluding tax)
■ POLYESTER Carbon Tail Patch ￥130,000 (excluding tax) / ￥136,500 (excluding tax)
■ XTR V-FLEX ￥165,000 (unit) / ￥173,250 (tax included)
■ XTR PARALLEL-FLEX ￥170,000 (unit) / ￥178,500 (tax included)
■ XTR 3D CARBOLIC ￥175,000 (unit) / ￥183,750 (tax included)
Stockboards with this POLYESTER Carbon Tail Patch will be arriving soon.
As of now, we don't have any stock of this cool and high-performance XTR V-FLEX model,
Custom orders are possible!! ★This XTR V-FLEX spec looks cool and in great condition!
The stockboard of the "SUB-DRIVER-JP" model that can be delivered by the end of this month is
Reservations are available, so please call or apply below!
http://www.luvsurf.co.jp/contact/contact.php
By the way, the initial stock of the 6'0" size was sold out on the first day of release.
Thank you! We currently have reservations available for 5'10" and 5'11"!
