The LAM mark sheet for the RNF-REDUX model, which LOST has started distributing to TEAM riders and has been receiving increasingly positive feedback. If you're talking about LOST riders, the ROUND NOSE FISH is a must-have model.
In the shaping room, MAYHEM was shaping a custom-ordered board from Japan, the "CHOPPER" model.
The red order card is attached to
We have received from Japanese customers,
Custom order boards and stock boards for Japan.
The boards with the red order card attached are made for Japanese customers, and the cloth material is a high-grade specification that is specially made for Japan, and is different from that used in the US.
Forms cut by the AKU machine are lined up.
There were many order cards for "Bruce Irons" stuck inside.
MAYHEM repeatedly checked Bruce Irons' board, which he had cut and was about to shape on the AKU machine, to make sure the cut was going well.
He found a few he didn't like and called Andrew, the factory manager, to have them re-cut. Now you can see why MAYHEM boards, which make no compromises, feel so good no matter what you ride!
I was shown the red order card before the foam was cut with the AKU machine, and it seems that today is the day when only
the ``CARBON WRAP'' will be cut.
This is the stringerless EPS foam from MARKO that's used in the LOST
CARBON WRAP surfboard. When you think of EPS foam, you might imagine a rough, bumpy texture, but MARKO's EPS foam has a smooth, clean surface, unlike other companies' foams. It also has good flex and excellent strength, which is why LOST uses it in their LOST
CARBON WRAP surfboards and
BLACK DART .
These boards have been wrapped and attached with carbon bands using CARBON WRAP. Imagine the extra flex in the tail area after the entire board has bent, giving you the speed you need to accelerate.
This was an undercover report on the LOST Surfboard Factory in San Clemente.
