Here is additional information about the new FCS plug for epoxy boards that we introduced the other day.
There are two types of FUSION.
It comes in orange 5 degree and gray 8 degree angles, and the shaper can choose the angle depending on the board.
Apparently it can be adjusted up to 2 degrees forward and backward when installed.
The cross section looks like this, and it is firmly integrated into the foam, allowing the power from the fin to be transmitted evenly to the board.
This is the box cross section of its rival, future.
Fusion is the official name, but it's difficult to pronounce,
Let's call her Fu-chan.
This is the familiar FCS plug for pickups.
The one on the far left is the first generation.
The one in the middle is the current translucent one called P2.
After a while, the grey elastic material on the right appeared.
It seems that it will come out.
There are two types of FUSION.
It comes in orange 5 degree and gray 8 degree angles, and the shaper can choose the angle depending on the board.
Apparently it can be adjusted up to 2 degrees forward and backward when installed.
The cross section looks like this, and it is firmly integrated into the foam, allowing the power from the fin to be transmitted evenly to the board.
This is the box cross section of its rival, future.
Fusion is the official name, but it's difficult to pronounce,
Let's call her Fu-chan.
This is the familiar FCS plug for pickups.
The one on the far left is the first generation.
The one in the middle is the current translucent one called P2.
After a while, the grey elastic material on the right appeared.
It seems that it will come out.
