The AKU blanks cutting machine was specially ordered from US Blanks.
This is the first video of shape cutting a polyester parabolic lens!
It takes about 1.5 times longer than a normal center stringer.
Two wooden stringers are carefully cut.
The tail and nose blanks are thinner at the
Slow down the speed to avoid putting too much pressure on the machine.
The movement of the lower part of the machine when cutting the center of the blank is faster than that.
You can see that I am programming.
Currently, Lovesurf is selling this Polyester Parabolic board.
Models such as RIPQUEST and SCORCHER are arriving one after another.
Free stock release, don't miss the updated information on the site's stock additions!
