"F-1 STUB" NEW MODEL 2010!
★Modern design based on the F1 model with enhanced all-around performance★
Features of "F-1 STUB"
- The tail floats up even in small waves, making it easy to operate!
・Improved design based on the F1 model
・For intermediate and above level.
・Recommended for waist to head size.
"F-1 STUB"
This is a new design based on the F1 model. In 2009, the F1 model was the favorite and choice of many professional surfers and team riders, and as a model, its widespread use highlighted improvements that would enhance its all-around performance. To maximize the F1's performance in smaller, less powerful waves, we made the outline slightly wider for forward launch, relaxed the nose rocker a little, and added a bump hip wing to the outline to widen the tail section of the tail block at the front of the fin. The design adds drive and lift while maintaining a maximum width of 12 inches for control.
The tail rocker and rails are the same as the F1 model, but the thin coating on the nose and tail gives it a lift and quick function that allows you to stay on top of the water even at slow speeds. We recommend a board that is 1/2 to 1 inch shorter than the F1. The F1 "STUB" is a fusion board that combines the most modern design with super high performance.
[F-1 STUB size lineup/suitable weight]
F-1 STUB
5'8" x 18 1/8"x 2 1/16" (173 x 46.0 x 5.25cm) 50-58kg
5'9" x 18 1/8"x 2 1/8" (175 x 46.3 x 5.4 cm) 55-63kg
5'10"x 18 3/8"x 2 3/16" (178 x 46.7 x 5.55cm) 60-68kg
5'11"x 18 1/2"x 2 1/4" (180 x 47.0 x 5.7 cm) 63-70kg
6'0" x 18 5/8"x 2 5/16" (183 x 47.3 x 5.85cm) 65-73kg
6'1" x 18 7/8"x 2 3/8" (185 x 47.9 x 6.0 cm 68-73kg
6'2" x 19" x 2 7/16" (188 x 48.2 x 6.2 cm) 70-75kg
[F-1 STUB Price] Clear/FCS Composite Normal Fins (3 pcs)
■ Polyester ￥125,000 (excluding tax) / ￥131,250 (including tax)
■ Polyester Parabolic Stringer ￥135,000 (excluding tax) / ￥152,250 (excluding tax)
■ XTR ￥155,000 body / ￥162,750 tax included
■ XTR 3D CARBOLIC ￥170,000 (excluding tax) / ￥178,500 (excluding tax)
If you were to choose a thruster model in 2010,
This "F-1 STUB" is a model worth considering!
