"Nano Tune" is a magical liquid that you can apply to the bottom to repel seawater and prevent loss of speed.
Creates an extremely smooth, water-repellent bottom coating.
This contains two spray bottles,
1. First, spray the "pre-tune liquid"
Wipe to coat.
next,
2. Spray the Speed Coat liquid onto the surface and wipe to coat it.
Finn and
Try using "Nano Tune" to see if it has an effect on the rails as well.
Anyone can do this coating so easily.
How to use
1. Pre-tune
2. Speed Coat
The whole process takes 2 minutes.
This is about the size of 10 shortboards.
[Set contents]
Speed coating x 1
Pre-tuner x 1
Cross × 2
stickers
★Increasing the speed of maneuverability creates a strong thrust (propulsion force).
★It allows for long, smooth glides and produces power even on flat sections.
★The board is less likely to get caught, allowing for smooth aerial performances.
★NANO TUNE's coating provides UV protection and fills pores and small holes, helping your gear last longer.
★Old boards can be revived by coating them with NANO TUNE.
The ride and handling will feel like new.
On surfaces without NanoTune coating, water droplets do not form beads, but gather and cover the surface, creating a large amount of resistance. On surfaces with NanoTune coating, water droplets do not form beads, but instead cover the surface, reducing resistance.
NanoTune's super-hydrophobic properties last for approximately 2-3 months, depending on how often you use it.
And it can be re-chained with a simple two-step application that takes just a few minutes.
Two clear bottles stuck together, facing the photo.
Nanotune is applied to the inside of the right side.
The left side is without nanotune.
Shake the two bottles...
*Please note the difference in how the red liquid inside repels towards the inside of the bottle.
The "Nano Tune" mark on the inside of the bottle does not have any red liquid on the inside of the bottle.
This is proof that it is water repellent.
Of course, it can be used with POLY, XTR, and Placebo.
I tried pouring water on a board with and without "Nano Tune" to see if it was really water repellent.
Indeed, the water glided off the Nano Tune board in a flash.
For those who can tell the difference, add ``Nano Tune'' to the bottom of your board to increase speed!
The deck is finished with FU WAX for a firm 3D grip !
Sales have started in stores now!
The work is completed in 2-3 minutes!
If you have a shortboard, you can use it about 10 times.
If you are using Nano Tune on your current board, you can use it even over stickers that are already attached.
If you are ordering online, you can also purchase "Nano Tune" here.
