LOST SUB-BUGGY x CARBON WRAP x Masato Yukawa

Today Masato is riding the same board as yesterday, the SUB-BUGGY CARBON WRAP.
I went surfing at a beach break called Salt Creek.
It's a wide beach break
There is a small cape in the middle of it, and only the area around it is a reef.
There are waves that break into right and left.

This photo is from the right side, and Masato is doing air on a rock and standing on it.

We will explain more about CARBON WRAP.

MARKO's high performance EPS foam
It is the lightest and strongest at 1.9 ounces.

The deck is equipped with a special, high-performance, uninterrupted "X-Cross," which is much more expensive than a POLY board.

This "X-Cross" is woven vertically and horizontally, unlike regular POLY board cloth.

It is knitted diagonally at 45 degrees,
Furthermore, it is woven with white polypropylene cloth,
The flexibility is outstanding,

Since the cross does not break, the board is strong enough that it rarely breaks.
The resin is epoxy resin, which has soft clay that absorbs shocks and does not easily break, and boasts a surface strength approximately five times that of poly board.
*Please note that
Like polyboards, high temperatures and UV rays can cause discoloration, so be sure to store your board in a board case.
When leaving it at the beach, cover it with a towel or something similar, and when storing it in your car for a long time, take measures such as leaving the windows slightly open or covering them with a shade to prevent it from getting too hot.
High temperature measures are necessary not only for CARBON WRAP, but for boards made of any material, as they will melt the wax, so be sure to take measures against high temperatures.

Patented,
LOST CARBON WRAP technology boards are currently the center of attention around the world,

Today, it was the center of attention both in and out of the water.

The other day, Masato went to Australia,
Apparently, a lot of people spoke to him there too!