Today, we are introducing the LOST Surfskate, which will enable even higher performance.
Here's how to replace the bushing!
The bushing we are introducing this time is
the "VENOM" bushing/90A/red
These bushes are hard enough to provide peace of mind when riding on ramps or in bowls.
Now, let me explain how to replace the bushings.
This is the handy tool we'll be using today!
The Skateboard Wrench is all you need for assembly and maintenance.
First, remove the skateboard trucks.
I'm going to remove this screw.
Like this, with the Phillips head screwdriver that comes with the tool wrench
Use the tool to remove it.
Remove the track, then
Remove the kingpin bolt that holds the bushing in place.
Once you remove it all, it will be separated into the parts shown below:
Next we'll install the new bushings!
First, put in the large cup washer (black tray),
Insert a new bush (one with uniform thickness)
Next, place the truck and the upper bushing on top.
Place the small cup washer (black tray) on top,
Insert the kingpin bolt.
Finally, tighten this nut to secure it in place.
When fixing it, hold the nut with your hand like this.
It's easy to fix.
Now the bushing replacement is complete!
Finally, attach it to your skateboard and enjoy!
This "VENOM" bushing is made of high quality urethane.
You can feel the strong repulsion, allowing for quick movements when turning.
It also improves your recovery performance when you lose your balance!
Why not try replacing the bushings and have some fun?
★『VENOM』Bush/90A/Red
>>Click here
★'Skateboard Wrench'
>>Click here
