Developed by AUROLA for surfing with 5 fins, adding 1 to the quad.
A new color, red, is now available for the ``REY'' fin.
"REY" is a small center fin that is 7.5cm high and weighs only 30g.
Place it in the open center when setting up a quad with a 5-fin plug board.
Made with honeycomb foam and microfiber mesh,
It is a luxurious product finished with a matte clear coating.
By adding "REY" to the 5-fin design,
Reduces the looseness that tends to occur when the tail comes loose, which is a common problem with quads.
It improves stability and drive performance while retaining the turning ability of a quad.
Depending on the wave conditions of the day, you can easily switch between 4 fins and 5 fins.
These fins are very fun to use because they can be changed in various ways.
Now, "REY" is available in two colors: BLACK and RED.
For those using FCS II plug boards
Easy installation with the FCS II TAB INFILL KIT .
If you ride a quad with a 5-fin plug board, this is your chance to try it out.
★For product details and to purchase the AUROLA "REY" Lightweight Fin, please click here!★Check out other AUROLA fins >>here!!★For product details and to purchase the "FCS II" TAB INFILL KIT, please click here!
「イアン・クレーン」のビーチヘッドから新しいYouTubeが公開になったのでご紹介します。
このYouTubeで注目したいのは「イアン・クレーン」が「ラスタ・ロブ」と一緒に2人で『LIGHT SPEED2』に乗っています。
2人ともスタブハイでの優勝経験があるエアがとてもうまいサーファーなのですが、
ビーチブレイクの程良いサイズのパワーのある波でLIGHT SPEED2』に乗っているところです。
日本だとこれぐらいのサイズは波が大きい方になると思いますが、これぐらいのサイズや力のある波でも『LIGHT SPEED2』は機能しています。
「イアン」が乗っているのはカラーペイントしてあるのでわかりづらいのですが『SUB DRIVER3.0』モデルのスワローテイルの『LIGHT SPEED2』です。
Ian: Sub Driver 3.0 Swallow Tail (Light Speed II) - 5'10" x 19.25" x 2.37" x 28.50cl
「ラスタ」が乗っているのは本人のシグネチャーモデルとも言える『RAD RIPPER』の『LIGHT SPEED2』です。
Rob: Rad Ripper (Light Speed II) - 5'6" x 19.00" x 2.30" x 27.25cl
『LIGHT SPEED2』はボードが軽くて跳ねるので、調子良さそうですね。ではご覧ください。
BEACH HEAD
One glorious afternoon spent CRANKing it on a mystical left rip bowl. Special appearance by Rasta Rob.
SurfboardsIan: Sub Driver 3.0 Swallow Tail (Light Speed II) - 5'10" x 19.25" x 2.37" x 28.50cl Rob: Rad Ripper (Light Speed II) - 5'6" x 19.00" x 2.30" x 27.25cl
Filmed and edit:Jacob Vanderwork
Developed by AUROLA for surfing with 5 fins, adding 1 to the quad.
A new color, red, is now available for the ``REY'' fin.
"REY" is a small center fin that is 7.5cm high and weighs only 30g.
Place it in the open center when setting up a quad with a 5-fin plug board.
Made with honeycomb foam and microfiber mesh,
It is a luxurious product finished with a matte clear coating.
By adding "REY" to the 5-fin design,
Reduces the looseness that tends to occur when the tail comes loose, which is a common problem with quads.
It improves stability and drive performance while retaining the turning ability of a quad.
Depending on the wave conditions of the day, you can easily switch between 4 fins and 5 fins.
These fins are very fun to use because they can be changed in various ways.
Now, "REY" is available in two colors: BLACK and RED.
For those using FCS II plug boards
Easy installation with the FCS II TAB INFILL KIT .
If you ride a quad with a 5-fin plug board, this is your chance to try it out.
★For product details and to purchase the AUROLA "REY" Lightweight Fin, please click here!
★Check out other AUROLA fins >>here!!
★For product details and to purchase the "FCS II" TAB INFILL KIT, please click here!
