Today we will introduce you to a simple method for repairing your surfboard using just these three steps!
Only these three are used!
1.
Phix Doctor DURA REZN Repair Agent
2.
"TOOLS" Repair Sandpaper
3. Clear tape (available at home improvement stores, etc.) or transparent vinyl is also fine.
First, remove the scratches with
sandpaper .
Next, cut the clear tape to a size that will cover the scratches, preventing them from coming into contact with air.
Have it ready to paste on the board.
(The tape is folded in half to prevent scratches on the adhesive side.)
Apply
Phix Doctor DURA REZN repair agent to the scratched surface.
Expose it to UV light for a while until the repair agent stops dripping.
Cover the scratched area with the tape you cut and applied to prevent air from getting in.
Leave it under UV light for about 5 minutes to harden.
Once hardened, remove the tape
Start by sanding with coarse sandpaper and finish with waterproof sandpaper.
It's finished!!!
This repair took about 30 minutes.
When you are traveling and need to repair a scratch in a short time,
It's an easy method, so please give it a try!
The repair agent used this time, "Phix Doctor," can be used on both polyester and epoxy,
Having one is convenient as it can be used on boards of either material.
★All repair supplies are available on this page!
