Skip to content

Introducing how to use the Rip Curl "H-BOMB" heat vest with photos!

With this, you'll be warm at the beach this winter! The revolutionary electrically heated "H-BOMB" heat vest from Rip Curl is now in stock! 1 This "H-BOMB" vest can be worn with any wetsuit. Developed by the highly successful Rip Curl International H-BOMB full suit Using technology and durability, the "H-BOMB" vest is an innovative electrically heated vest. Made with the highest quality materials and waterproof components, it is highly effective in cold climates with low water temperatures! The Rip Curl "H-BOMB" heat vest has been a hot topic of inquiries. Today, we will introduce how to use it with photos. Please use this as a reference when purchasing. The package box contains the heat vest itself, a battery, an instruction manual and a warranty card. IMG_9285 The vest is made from the lightest, most flexible, warmest and thinnest 0.3mm neoprene. IMG_9305 Battery and charger are included. IMG_9287 Preparation before use. Each component connector has a dummy plug attached to protect the pins, so please remove it before use. IMG_9289 Connect the battery connector to the Rip Curl charger and tighten the connector screws. (Be careful not to tighten too much.) IMG_9290 The time required for charging is approximately 3 hours. The red light in the photo indicates charging. Charging is complete when the light changes to green for full charge mode. IMG_9291 Once charging is complete, be sure to check that the O-ring (packing) is attached to the battery. A spare O-ring (packing) is also included. IMG_9294 Connect the battery to the vest and tighten the connector screws. (Be careful not to tighten too much.) Now you're ready to go. IMG_9295 The heat vest can be switched between two modes: low temperature mode and high temperature mode. ▼Low temperature mode Press and hold the switch in the center of the battery for about 2 seconds. When this green LED light comes on, it means the unit is in low temperature mode. Battery life in low temperature mode is approximately 2 hours and 30 minutes. IMG_9364 ▼High temperature mode Press and hold the switch in the center of the battery. When this red LED light comes on, it means it is in high temperature mode. Battery life in high temperature mode is approximately 1 hour and 50 minutes. IMG_9358 Once you turn it on, you'll notice the vest getting warmer almost immediately. To turn it off, press and hold the button for about 3 seconds. This "H-BOMB" vest can be worn with any wetsuit, It can be easily operated even from the top of a wetsuit. image2 IMG_9297 This "H-BOMB" vest uses a carbon fiber heating system It covers an area four times larger than other competitors' products! ↓On the left is the RIP CURL "H-BOMB" heat vest. You can see how it provides warmth over a wide area! feature_img1 The vest also has a zipper on the side, making it easy to put on and take off without any stress. IMG_9303 The price is ¥43,000 + tax. "People who are more sensitive to the cold than anyone else," "People with back problems," "People who want to wear something under a 3mm full-length jacket to make it easier to move around in the middle of winter." Now you can surf comfortably even in the middle of winter! We highly recommend this to female surfers who don't want to get cold. ★'Rip Curl' H-BOMB POWER HEATED VEST For details and to purchase, click here!
Previous Post Next Post