We have some new fins added to our popular
used fin section.
Today we will introduce some of the recommended fins we have added.
▼Used FCS "FG-3" TRI Fin color RED (1set/3 pieces) for FCS
Price: ¥2500
(including tax) ¥2700 (new price ¥10,584)
*This product is a special second-hand item and does not come with a dedicated case.
This is a used FCS FG-3 TRI Fin at a special price.
There are scratches and dirt due to use, but this does not affect use.
When purchasing, please make sure you understand the details before purchasing.
■F-series
This board is aimed at surfers who feel that composite boards are too flexible and carbon light boards are not flexible enough.
Epoxy resin and foil technology.
The inside foil, like an airplane wing, provides lift to the tail while minimizing resistance when turning.
It is designed to provide better driveability, response and acceleration, helping you reach top speed faster.
FCS Fin "FG-3" Color: RED
Base: 109.0mm, Depth: 112.0mm, Area: 9172mm2
*Base = base width Depth = height Area = total surface area of the fin
This is a set of 3.
Used AUROLA Conquest Iron Plate Quad-Fin (1 set of 4) for FCS
Body ¥4000
(tax included ¥4320 ) (New price ¥19800)
*This product is a special second-hand item and does not come with a dedicated case.
This is a used AUROLA "Conquest" QUAD-FIN at a special price.
There are some scratches and slight chips, but this does not affect use.
When purchasing, please make sure you understand the details before purchasing.
The AUROLA fin is made by RATIO, a fin manufacturer that Japan is proud of.
A fin set made in Japan with exquisite handmade techniques and quality.
It is lightweight, and the base is stiff and strong, but the tip is more flexible.
It is made using special materials and manufacturing methods that other manufacturers cannot imitate.
The fins are cut as thin as possible, allowing you to drive forward quickly without encountering water resistance.
It matches any board, moves quickly, and extends turns.
This is a tri-fin set with excellent overall balance.
The patterned material is applied to both sides, and then hot coated for finishing.
This is the AUROLA fin series, which has been polished to a glossy finish.
This is a fin set that works surprisingly well on any board.
The AUROLA/Conquest FIN will make your board move more smoothly and give you more speed than ever before.
AUROLA Conquest Quad Fin Set by Ratio
Color: Iron Plate
For FCS 4 pieces/set
Fin size
SIDE FIN – Height / 12.8 cm Base Width / 11.5 cm Area / 9006sqmm Perimeter / 446mm
BACK TWO- Height/ 10.3cm Base Width/10.3cm Area/6668sqmm Perimeter/391mm
Used AUROLA 5.1+4.2 Clear (Quad-Fin, 1 set of 4) for FCS
Body ¥6000
tax included ¥6480 (new price ¥18144)
*This product is a special second-hand item and does not come with a dedicated case.
This is a used special price item of "5.1 + 4.2" (QUAD-FIN/1 set/4 pieces).
There are some minor scratches, but the fins are in good condition, like new.
When purchasing, please make sure you understand the details before purchasing.
If you are dissatisfied with your current QUAD board because it is too loose,
We recommend this to those who want to add weight to their lip action.
The 5.1's front fins use inside foils.
When the board picks up speed, it pushes the board upward, increasing riding speed.
During ripping action, it provides performance that makes the board turn over easily.
We have succeeded in making it as light as possible, allowing the rider's intentions to be instantly reflected in their riding.
When you pick up these fins, you'll be amazed at how light they are.
You'll be amazed at how responsive it is the first time you put it on and surf.
The 4.2 back fin foil is a center fin foil (double sided foil).
It's not a side fin foil, which makes the tail too loose.
This fin is ideal for boards that are wider near the tail.
◆Color: Clear
◆FCS Weight 262g (4 sheets/1 set)
◆Fin size
Front 5.1 Height/12.3cm Base Width/13.1cm Area/12187sqmm Perimeter/512 mm
Back 4.2 Height/ 9.8cm Base Width/10.7cm Area/ 9295sqmm Perimeter/435 mm
◆Fin size compared to G5.
——————————————————————–
Comparison with FLEX-5 G5
FRONT & CENTER FIN
Height/ +0.7 cm Base Width/ -0.2 cm Area/ +254sqmm
QUAD BACK FIN
Height/ -0.5 cm Base Width/ -1.2 cm Area/-1677sqmm
Comparison with TRIPLE RAZER G5
Height/ +0.7 cm Base Width/ -0.4 cm Area/ -104sqmm
4.5 Comparison with G5
Height/ +0.5 cm Base Width/ -0.8 cm Area/ -633sqmm
4.7 Comparison with G5
Height/ +0.9 cm Base Width/ -0.2 cm Area/ +90sqmm
—————————————————————-
G-3
Height / 10.9 cm Base Width / 11.2 cm Area / 9172sqmm
G-5
Height / 11.1 cm Base Width / 11.5 cm Area / 9525sqmm
GMB
Height / 11.2 cm Base Width / 12.0 cm Area / 9874sqmm
G-X
Height / 9.8 cm Base Width / 10.0 cm Area / 7140sqmm
G-1000
Height / 10.4 cm Base Width / 10.8 cm Area / 8158 sq mm
All fins are offered at exceptional prices!
Don't miss the popular used fin corner!
★Click here to see the popular used fin corner!
