Blog
Check out the video of the verification test of the water-resistant XTR foam!
100% "Waterproof" XTR Foam! The reason why Lovesurf recommends XTR material, and why we have so many repeat customers, is because XTR foam does not absorb water. This means that even if scratches appear without you realizing it, like with POLY or EPS boards, You won't notice it getting heavier. The fact that it stays as light as when you first bought it is a big reason why people choose XTR boards. Habyar, the developer of the XTR board, has created an interesting test video, which we would like to introduce to you. The stance part, which appears black, is made of XTR resin and carbon cloth to give it strength. Since fins also need to be installed, the area around the fins is also glassed. The white areas are exposed XTR foam and are not glassed. If you look closely, you can see that it has been pierced with a needle. First, measure the weight of the board before surfing. That's about 4.7 pounds, or 2.2 kilograms. We actually surfed the board and took it for a waterproof test ride. After getting out of the sea, wipe off the water that has adsorbed to the surface of the foam. When we weighed it, it was the same weight as before it went into the sea. That's about 4.7 pounds, or about 2.2 kilograms. It certainly hasn't absorbed any water!! Here is the test video. XTR boards are truly durable, so if you haven't tried it yet, it's a high-end surfboard material that we highly recommend you give it a try. To learn more about XTR, click here. The strongest XTR 3D CARBOLIC! http://www.luvsurf.co.jp/board/material.html#xtr-para New XTR material for Japanese waves with a flexible flex! XTR PARALLEL-FLEX! http://www.luvsurf.co.jp/board/material.html#xtr-3d
Learn moreLOST "ORCA" model stockboard now in stock for the first time!
The first stockboards from LOST's "ORCA" model have arrived! The first stock board, the LOST "ORCA" model, exclusive to the extremely crowded Shonan area, has arrived! Deck surface seen from the nose Bottom surface seen from the nose Deck surface seen from the tail It may be hard to tell from the photo, but the bottom of the ORCA is as small as a boat. The dome-shaped design makes it easy to move the extra-wide board from side to side. The tail is a single wing with a WIDE DIAMOND tail shape. The concave at the tail of the bottom is complex and uneven. The double concave design makes the edge of the wing look slightly sharper like a hook. Of course, it also includes the ORCA model mark! We only have a few boards in stock, but they will be available in stores from September 1st after they have been officially imported and undergone our own inspection and secondary processing. http://luvsurf.co.jp/24sblog/?s=ORCA http://luvsurf.co.jp/24sblog/?s=ORCA&paged=2 http://luvsurf.co.jp/24sblog/?s=ORCA&paged=3 For more information about ORCA, please see here.
Learn moreNew LOST TV: like father like son by Jordan Ahern
Like Father, Like Son Noah Beschen, the eldest son of the Beschen family, is the second generation of lost musicians who will likely become world-class after Kolohe. This is a father-son surf clip with his father, Shane Beschen. Noah grows bigger every time I see him. His silhouette and profile look just like his father's. Even in their early teens, they can perform carving turns with rails like this. Lip then removes his fins, faithfully adhering to the Beschen family teaching of "PUSH TO TURN." My dad shows me how to do it right in front of me. If you spend time with a dad like that, you'll get better. The board Noah is riding is a SCORCHER model. So enjoy that surf clip. two sessions with noah beschen and his dad shane at lowers.
Learn moreLOST's new "SUB-DRIVER" stockboard model is now available!
LOST's new model stockboard "SUB-DRIVER" arrives in Japan for the first time! This is an all-around model that is highly responsive and excels in small to medium-sized waves! SUB-DRIVER Features ・Designed to tackle boring small waves ・Floating speed increases ・For intermediate and above level. ・Knee to chest size recommended. The SUB-D is a model that Mayhem created by shaping Kolohe's ideas. In small, wind-driven waves, Kolohe was riding the Sub-Scorcer. Rather, it has a certain size and is not dug up, I used the DRIVER for powerful waves. Kolohe said he wanted a board somewhere between the Sub-Scorcher and the Driver. I (Mayhem) have used the design program (AKU SHAPER) We were able to incorporate and subtract different elements from each other's boards. The outline of the "SUB-SCORCER" is based on the rocker, bottom design, and rail shape of the "DRIVER." The result was a design that was somewhere between his "SUB-SCORCER" and "DRIVER." Therefore, the SUB-D has a slightly weaker tail rocker than the SUB-SCORCER (there is no outward facing VEE), There are more flat areas, but because it's a "DRIVER" design, there's a bit more nose rocker. Think of "SUB-D" as "SUB-SCORCER" with increased driving power, a characteristic of "DRIVER." The bottom concave is slightly deeper than the SUB-SCORCER, giving it a lifted ride. It's a design that feels great in small, boring waves. It responds quickly to the rebound force of the waves, making it an excellent model for all-round use in small to medium-sized waves. 5'6" x 18 1/2" x 2 1/16" 5'6" x 18.50" x 2.07" (168 x 47.0 x5.25cm) 50-58kg 22.28cl 5'7" x 18 5/8" x 2 1/8" 5'7" x 18.63" x 2.13" (170 x 47.3 x5.4 cm) 55-63kg 23.36cl 5'8" x 18 3/4" x 2 3/16" 5'8" x 18.75" x 2.18" (173 x 47.6 x5.55cm) 60-68kg 24.91cl 5'9" x 18 7/8" x 2 1/4" 5'9" x 18.88" x 2.25" (175 x 47.9 x5.7 cm) 65-73kg 25.65cl 5'10" x 19" x 2 5/16" 5'10"x 19.0" x 2.32" (178 x 48.3 x5.85cm) 70-80kg 26.94cl 5'11" x 19 1/4" x 2 3/8" 5'11"x 19.25" x 2.38" (180 x 48.9 x6.0 cm) 75-85kg 28.34cl 6'0" x 19 1/2" x 2 7/16" 6'0" x 19.5" x 2.46" (183 x 49.5 x6.2 cm) 80-88kg 30.95cl 6'1" x 19 3/4" x 2 1/2" 6'1" x 19.75" x 2.5" (185 x 50.1x6.35 cm) 85-93kg 31.37cl [SUB-DRIVER Price] Clear/Includes 3 FCS Glass Flex Fins ■ POLYESTER ￥120,000 (excluding tax) / ￥126,000 (excluding tax) ■ POLYESTER Carbon Tail Patch ￥125,000 (excluding tax) / ￥131,250 (excluding tax) ■ POLYESTER PARALLEL-FLEX ￥145,000 (unit) / ￥152,250 (tax included) ■ EPS Marko Carbon ￥155,000 (excluding tax) / ￥162,750 (excluding tax) ■ XTR PARALLEL-FLEX ￥165,000 (unit) / ￥173,250 (tax included) ■ XTR 3D CARBOLIC ￥170,000 (excluding tax) / ￥178,500 (excluding tax) All sizes of boards that have arrived will be posted on the website soon, so stay tuned! There are only 1 or 2 of each size available, so you can make a reservation!
Learn moreOne for every family! Check out the size comparison photos of AUROLA "REY"!
AUROLA 『REY』Lightweight Fin / ¥4,200 (excluding tax) / ¥4,410 (excluding tax) Color: BLACK / 1 color only FCS Weight 30g (1 sheet) ■Fin size Height/7.5cm Base/7.7cm Area/4653 sqmm Perimeter/298 mm Size comparison with FLEX-FIVE fins Size comparison with CHARGER fins Size comparison with TRIPLE RAZER fins Size comparison with BAMBOO fins Size comparison with CONQUEST fins From the left, size comparison with the "5.1", "4.2", and "5.1 Center" fins Size comparison with QUADLOW fins ■ Features of REY fins *If you add this "REY" to a quad setup 5-fin plug board and ride it with 5 fins, It reduces the looseness of the quad fin, giving it a ride feel somewhere between a quad fin and a tri fin. *This AUROLA "REY" fin is a small center fin that is 7.5cm high and weighs just 30g. *A honeycomb foam core is placed inside the fin to reduce weight, Microfiber mesh is wrapped around both sides of the fin to increase hardness, The black stripe line and fin mark are decorated using the water transfer technique. Finished with a matte clear coating. *For those who have a popular 5-fin plug surfboard in a quad setup, It was developed with the aim of allowing surfers to surf with five fins in addition to the open center fin. *This fin can also be used as a center fin, If you set it as the center fin of a tri-fin board, This allows a tri-fin board to be ridden with the loose feel of a twin stabilizer fin. *If you have two, you can also use them as small back fins for a quad fin. How you use "REY" is up to you. The price is 4200 yen (base price) / 4410 yen (tax included).
Learn moreNew! "AUROLA" ultra-small center fin for 5-fin boards
Introducing a new, tiny center fin for 5-fin boards from AUROLA! This fin is a small center fin that is 7.5cm tall and weighs just 30g. The fins have a honeycomb foam core inside to reduce weight. Microfiber mesh is wrapped around both sides of the fin to increase hardness, The black stripe line and fin mark are decorated using the water transfer technique. Finished with a matte clear coating. For those who have a popular 5-fin plug surfboard in a quad setup, If you add this "REY" to the empty center fin and ride with 5 fins, It reduces the looseness of the quad fin, giving the board a ride feel somewhere between a quad fin and a tri fin. This fin can also be used as a center fin. If you set it as the center fin of a tri-fin board, This allows a tri-fin board to be ridden with the loose feel of a twin stabilizer fin. If you have two, you can use them as small back fins for a quad fin. How you use "REY" is up to you. The price is ¥4,200 (base price) / ¥4,410 (tax included).
Learn moreApproximately 300 Presage bottles! Summer vacation is just around the corner! Last shipment just before the Obon holidays!
This time we received a whopping 300 Presebo surfboards!!! When the boxes are unloaded from the container truck in front of the store, The store's display windows are covered and the interior is completely dark. There was a north wind blowing in Tokyo today, so it wasn't very hot, Due to the quantity, the inspection and sorting process takes 12 hours. We have been prioritizing the inspection of boards for those who have made reservations, Starting tomorrow, we will contact you in order of reservation and provide you with information! Last time, the stock was gone in a flash, We apologize for the long wait to those who came to the store wanting it right away and those who made reservations!! Popular sizes of popular models that have never been available in stores before will be available from August 2nd!! Production cannot keep up, it feels good to ride, has excellent strength and does not discolor, Get the explosively popular, newly evolved FLEXLITE-TURBO placebo while it's still in stock! Get yours now, first come first served! Presebo surfboards, just before summer vacation! This was the last shipment before the Obon holidays.
Learn moreGokin's air was selected as this month's best air!
I've been spending more time in California lately than I ever have before. As a result, many photos and videos were posted in various places, and Love Surf I am very happy that Gokin's air was selected as the best air of the month. That's why we are developing this original Love Surf design in collaboration with Cyber Suit. The ANCHOR suit has become more visible, and I've received emails from foreigners saying that Gokin is wearing it. We have started receiving inquiries from people wanting high-quality wetsuits. We've also received inquiries from surf magazines in the US asking if we would like to advertise in them. As an ANCHOR rider, he is performing very well on the international stage. This high, long-air, spinning backside air It was apparently taken in the left section of the Lower Trestles in California. Here is the link to SURFLINE where this riding video is posted. http://www.surfline.com/surflinetv/punt-of-the-month/aaron-cormican-inverts-at-lowers_57533 We have opened a " Luvsurf page" on Facebook . http://luvsurf.co.jp/24sblog/?page_id=9096 If you become a fan by clicking the "Like" button on the Love Surf Facebook page by the end of August, you'll be entered into a drawing to win a Lost Conquest Parallel Flex. If you haven't registered on Facebook yet, please register now and have a chance to win a Conquest! This giveaway will be available until the end of August, but there will be different giveaways every month after that, so be sure to register. How to register on Facebook and why we recommend you to register on Facebook are as follows: http://f-navigation.jp/ It's very easy to understand if you take a look here!
Learn moreIt was so popular that it sold out in just one day after it went on sale.
We introduced it on the "Luvsurf" Facebook page when it arrived, It was sold out in one day after it went on sale on Luvsurf's "WEB★Store". This T-shirt has a message printed on it that is typical of the LOST brand. It is also used on caps and is very popular, so we asked Mayhem for permission to use this design. Luvsurf has also designed stickers with similar messages printed on them. Here it is! This sticker will not be sold. It will be given as a gift! We will inform you in the email newsletter why we are not selling the product. If you haven't signed up for our email newsletter or Facebook yet, please do so as soon as possible! We have opened a " Luvsurf page" on Facebook . http://luvsurf.co.jp/24sblog/?page_id=9096 If you become a fan by clicking the "Like" button on the Love Surf Facebook page by the end of August, you'll be entered into a drawing to win a Lost Conquest Parallel Flex. If you haven't registered on Facebook yet, please register now and have a chance to win a Conquest! This giveaway will be available until the end of August, but there will be different giveaways every month after that, so be sure to register. How to register on Facebook and why we recommend you to register on Facebook are as follows: http://f-navigation.jp/ It's very easy to understand if you take a look here!
Learn more