Blog
Would you like to be one of the top 100 true FAB fans?
For true FAB enthusiasts, only 100 pieces will be produced! FAB limited to 100 pieces Only 100 pieces will be produced by FAB. Long sleeve wetsuits will be on sale. For true FAB enthusiasts, only 100 pieces will be produced! 2 colors: Black/Mark Gold 2 colors: Black/Mark White 4 sizes: M/ML/L/XL Tax included: 31,500 yen If you let us know the color and size in advance, we will secure it for you!! The product is scheduled to arrive after the Golden Week holidays in May. There are only 100 available, so reservations are first come, first served! Please call us or fill out the contact form. http://www.luvsurf.co.jp/contact.htm l Please send it to. If you're a true FAB fan, make the most of this summer with this LS Tupperware!! Are you one of the top 100 FAB fans?
Learn moreA hard case perfect for storing CQ/FQ/MONK
Perfect for Conquest and Fish Quest. The hard case has arrived. The normal hard case I had been using was too thick and wide to fit it in. The wide and thick Conquest and Fish Quest are super buoyant. This hard case from DESTINATION fits the rods neatly and allows for smooth and easy access. We have confirmed that both the Conquest and FishQuest fins can be used with all five fins set up on all FCS plugs without any problems. There is a large pocket on the side that can compactly store fins and leashes. Remove the Velcro fastening on the rear side of the case from the center. Increasing the width of the case body increases capacity. Once you remove the fins from both boards, You can easily fit two boards inside. This excellent hard case also comes equipped with an inner divider so that you can stack the two boards together even after applying the wax. Its compact, unobtrusive design makes it ideal for everyday use, yet the 10mm foam padding makes it thicker than a regular hard case, providing extra protection for your precious board. This makes it perfect for overseas surf trips. DESTINATION "THE 142" 6'4" EX TRAVEL BAG Air Travel compatible hard surfboard case for 1 to 2 boards 14,800 (excluding tax) / 15,540 (including tax) *High-strength #6000 nylon with 10mm foam protection. *The shoulder strap (with strap) makes carrying easy and has a pocket that can be stored when not in use. *Equipped with a large multi-functional pocket for surf accessories. This is an excellent hard case that can be used as a hard case for one surfboard on a normal basis, and can also be used as a hard case for two surfboards when on a surf trip. When you make a reservation for Conquest or Fish Quest, please Please also consider purchasing this hard case made by DESTINATION at the same time. If you already own a Conquest or Fish Quest and are having trouble finding a hard case, we recommend ordering this hard case made by DESTINATION. ＊＊＊＊＊＊＊ Also recommended for MONK! ＊＊＊＊＊＊＊＊＊＊ Please use this form to order! http://www.luvsurf.co.jp/contact.html We look forward to your orders!
Learn moreI recommend it to people who have time to spare!
How about custom ordering other models such as Conquest and Fish Quest? Of course, you can order custom sizes, like this, The Planet Team mark, which is only available on officially imported boards, can be added to both sides of the nose. Put the Conquest mark under the Mayhem mark, Instead of using a sticker, you can have the Love Surf mark laminated on the rail or other desired location. A custom shaped board for you is yours to prove. The name is signed. Although it is not possible to specify the exact position of the mark, It will be completed in roughly the position you want. The delivery time is approximately 4 to 5 months. We recommend this to anyone who has the time and is particular about their food!
Learn moreAUROLA/CONQUEST fins are rapidly gaining popularity among professionals!
The flagship model of the AUROLA fin series, Among professional surfers based in Chiba who use CONQUEST fins High performance is a hot topic right now. And today, professional golfer Hideyoshi Tanaka will be He came to the store looking for AUROLA/Conquest fins. The color design that you chose is "OCEAN STRIPE" is a combination of refreshing blue lines. I found the LOST movie that I had been watching on the boat trip. This is it! He got excited and went to get it. Apparently he's a fan of Ward. How about you all? The AUROLA fin series is rapidly gaining popularity among professionals!
Learn moreThe latest surf trends will be available at Love Surf this spring!
It was unveiled for the first time at the ASR exhibition in San Diego, California, which I visited recently. We would like to introduce you to a brand called TAVIK. This is a new brand that just launched in the US, and its name is pronounced in katakana as Turbic. This is a brand aimed at core surf, skate, and snow users. The rider is Schoenbeschen, who has transferred from MONUMENT. Here is a video of an interview with Shane, who was at the TAVIK booth. TAVIK is a new brand that incorporates the latest surf trends into its designs. Of course, it will be available at Love Surf early this spring, so please look forward to it!
Learn moreAnother new fin has arrived!!
CONQUEST "BACK TWO" fins ¥8,500 (excluding tax) / ¥8,950 (including tax) (2 pieces for back fins / 1 set) Color: NATURAL only FCS Weight 87g 2 pieces/1 set (standard fin 67g) Future Weight 105g 2 sheets/1 set (normally included FIN 86g) Fin size 『BACK TWO』 Height/ 10.3cm Base Width/10.3cm (Usually included FIN Height/ 9.0cm Base Width/ 9.3cm) *This is an optional fin that is especially recommended for Conquest users. This is a larger size of the back fin that is normally included for Conquest/Quad. *These fins have been developed to handle larger waves and deeper waves than ever before. Conquest users, we look forward to your orders!! *The shape of the regular Conquest quad back fin remains the same, but it has been scaled up approximately 15% larger. *Recommended for those who want to make more driving turns than with regular Conquest fins, or turn with more force and more speed by applying all their weight. *With this spare fin, you can use your Conquest in a wider range of waves.
Learn moreThe cute "TINIER Fin" is now in stock, how you use it is up to you!
The AUROLA brand is a project that turns the ideas of people who say, "I wish there was something like this," into products. These little fins are the result of a request from one person. AUROLA 『 TINIER Fin 』 Micro Fiber Flex / ￥3,500 excluding tax Color: Black x Clear / 1 color only FCS Weight 24g (1 sheet) Size: Height/4.8cm Base/9.3cm *This is a tiny center fin foil fin designed to be attached to the 5-fin boards that will be arriving in stores in the future. *These ultra-lightweight fins are carefully crafted by laminating microfiber in the center with epoxy resin on both sides. *Attaching this as a support fin to the center of a quad-fin board will increase stability and drive. *The quad prevents the tail from slipping out due to excessive kicking, allowing you to approach steep sections of the wave with confidence. *5 Fin Plugs You can surf without wasting the center fin plug that comes with the board. *You can also attach it to the center plug of a regular tri-fin or twin fin + stabilizer to enjoy tight and loose surfing. *Try using two of these as quad back fins, and you can imagine a wide range of other uses for these very unique fins. *This ``Tinner Fin'' comes with a small dedicated fin case. How you use TINIER Fin is up to you!
Learn moreConvenient and fast, fin wrenches now in stock!
This key wrench is for removable fins. The quick-turning pipe and T-handle make it very easy to tighten and loosen set screws. The tip of the wrench is a ball point, so it can be turned even at an angle. Currently, it is only available in blue and weighs approximately 40g. 1,200 (excluding tax) The introduction of removable fins has made surf trips much more convenient. It's no exaggeration to say that most of the damage to surfboards on airline trips up until now has been to the fins. Removable fins not only eliminate this problem, but also allow surfboard bags to be made smaller and thinner, allowing more boards to be taken on a trip. And of course, you can change fins depending on the waves, the board, and your preferences. However, the FCS (Fin Control System), one of the most popular removable fins, requires tightening and loosening at least six set screws. This can be quite a time-consuming task on a surf trip where you often have to put fins on and take them off. What's more, the wrench that comes with the fins is small and not necessarily easy to use. The Cross Ocean fin wrench makes it incredibly easy to install and remove FCS and future fins. The T-handle makes it easy to apply force when tightening and loosening, and the hard chrome-plated ball point hex wrench allows you to insert the wrench at an angle of approximately 20 degrees from the center of the screw. You can hold the wrench by the quick-turn pipe on the body and turn the handle to tighten or loosen. In the case of FCS, the tip of the screw bites into the base of the fin and scratches it, so when you try to remove it, the burrs from the scratches get caught on the screw, making it difficult to remove, and you may have to loosen the screw more than you tightened. The quick-turn pipe makes it easy to loosen the screw quickly. The T-shaped handle is made of resin and the fin wrench weighs approximately 40 grams. Made in Japan (patent pending) Mail order is also available!
Learn moreOnly one left, this is a super rare COIL SD3 model!
This is a photo taken today in the waves of Minami Boso, Chiba. Today, the coldest north wind of the year was blowing so hard that some people were even wearing gloves and head caps. Professional golfers Izuki Tanaka and Naoto Takanashi, who are not usually seen in this area, also headed south to this area of Chiba due to the extreme cold. The board I ride is a COIL/SD3. It was expected to be released this year, but instead of collaborating with Lost, COIL has decided to use their own shapers and launch the product under the COIL brand. This means that LOST's COIL is a very valuable board. This is a rare product, with only seven bottles ever imported to Japan, including this one from Nishii. Nishii took this board on surf trips to California, Bali and the Mentawai, and as the Mayhem is said to be difficult to break, it is really strong and there is no damage, and for some reason it has not yellowed and is still pure white. The foam is EPS so it is very flexible. There is currently only one left. We would like to inform you that we would like to have someone who understands the value of this board purchase it. The size is LOST/COIL/SD3 ¥180,000 excluding tax / ¥189,000 including tax 5'11" x 18 1/8" x 2 1/16" (180 x 46.0 x 5.25) Recommended weight around 55-60kg SW FUTURE ■■■ http://www.luvsurf.co.jp/board/lost_stock.html Only one left, no plans to restock anytime soon - this is an extremely rare COIL SD3 model!
Learn more