New riding video released! 5FIN SHARK model.
Koji Nishii: Board used: LOST 5'8" XTR Parabolic DD 5FIN SHARK
The movie's release page is here.
http://www.luvsurf.co.jp/movie/lost_movie.html
This is a riding video of a LOST 5-fin SHARK model XTR Parabolic Stringer.
This riding video shows how by making the most of the unique flexibility of the XTR Parabolic Stranger, bending your body at the bottom, weighting the board, and then heading to the top, you can make driving turns more easily than with a polyester board.
XTR PB is a cutting-edge structure that uses two radial wooden parabolic stringers with XTR characteristics. The stringers are highly compatible with XTR foam, creating a lively flex that makes the board bend as if it were alive.
The XTR's unique speed flex flexes supplely and then returns to its original shape with great response, instantly raising your riding speed to the limit.
The more weight you put on it, the further forward you extend your turn. With the XTR PB, you can easily gain speed with the same weight as always.
The fins used in these videos of Pro Nishii riding are the AULORA "5.1 + 4.2 QUAD set" with the AUROLA "TINER FIN" attached in the center, which reduces the looseness of the QUAD fins and makes it easier to perform top action. We encourage you to try this 5-fin setup.
Here is the board description for this model:
http://www.luvsurf.co.jp/board/lost_model.html#shark4
Here are some impressions of this model:
http://www.luvsurf.co.jp/board/24_impression.html#shark4
Ready-to-ride stocks for this model are available here!
http://www.luvsurf.co.jp/board/lost_stock.html#shark4
The 5FIN SHARK is equipped with a super convertible 5-fin/FCS plug that can be used with not only the standard quad, but also thrusters, twin stabilizers, and even 5 fins for big waves that require drive.Depending on the fin settings, it is a board with an excellent design that can be used in more all-around situations than any other board.
How about you all?
The 5FIN SHARK XTR Parabolic Stringer is great!
Koji Nishii: Board used: LOST 5'8" XTR Parabolic DD 5FIN SHARK
The movie's release page is here.
http://www.luvsurf.co.jp/movie/lost_movie.html
This is a riding video of a LOST 5-fin SHARK model XTR Parabolic Stringer.
This riding video shows how by making the most of the unique flexibility of the XTR Parabolic Stranger, bending your body at the bottom, weighting the board, and then heading to the top, you can make driving turns more easily than with a polyester board.
XTR PB is a cutting-edge structure that uses two radial wooden parabolic stringers with XTR characteristics. The stringers are highly compatible with XTR foam, creating a lively flex that makes the board bend as if it were alive.
The XTR's unique speed flex flexes supplely and then returns to its original shape with great response, instantly raising your riding speed to the limit.
The more weight you put on it, the further forward you extend your turn. With the XTR PB, you can easily gain speed with the same weight as always.
The fins used in these videos of Pro Nishii riding are the AULORA "5.1 + 4.2 QUAD set" with the AUROLA "TINER FIN" attached in the center, which reduces the looseness of the QUAD fins and makes it easier to perform top action. We encourage you to try this 5-fin setup.
Here is the board description for this model:
http://www.luvsurf.co.jp/board/lost_model.html#shark4
Here are some impressions of this model:
http://www.luvsurf.co.jp/board/24_impression.html#shark4
Ready-to-ride stocks for this model are available here!
http://www.luvsurf.co.jp/board/lost_stock.html#shark4
The 5FIN SHARK is equipped with a super convertible 5-fin/FCS plug that can be used with not only the standard quad, but also thrusters, twin stabilizers, and even 5 fins for big waves that require drive.Depending on the fin settings, it is a board with an excellent design that can be used in more all-around situations than any other board.
How about you all?
The 5FIN SHARK XTR Parabolic Stringer is great!
