What is the difference between "XTR PARALLEL FLEX" and "XTR 3D CARBOLIC"?
We will explain the differences between the newly announced "XTR PARALLEL FLEX" and "XTR 3D CARBOLIC".
"XTR 3D CARBOLIC" is
There are no wooden stringers,
The strength of the board comes from the Kevlar carbon rails that are wrapped around the rails.
The board has a frame made of Kevlar carbon wrapped around it from nose to tail,
It also prevents the board itself from twisting when flexing.
In addition, the Kevlar carbon rails are very strong and will not easily break even with minor contact.
It is made with just the right weight and is less susceptible to wind than POLY.
This board material is recommended for those who are heavy and who want their board to be durable and ride for as long as possible.
"XTR PARALLEL FLEX" is
I put a wooden stringer near the rail and adjusted it.
The Kevlar carbon stripe on the bottom gives the board flexibility.
By specifying the proper front and rear position, the board will bend deeply, rebound, and bounce up even more when it bounces back.
It's designed to increase speed with every turn.
Furthermore, the part behind the tail that is just foam and has no stringers is
Like POLY's PARALLEL FLEX, it flexes extra for acceleration.
The board has a light weight and moves and responds nimbly.
For those who are not confident in their leg strength or who prioritize performance when riding,
We recommend the "XTR PARALLEL FLEX".
The flexibility of these two material boards is greater than that of the "XTR 3D CARBOLIC"
"XTR PARALLEL FLEX" is softer.
The white foam used inside is the same XTR foam material.
Why is the XTR board the most recommended at Love Surf?
As you may already be familiar with, this XTR foam does not absorb water,
Your board may absorb water without you realizing it and become noticeably heavier than when you first bought it.
There is nothing to worry about.
This is because it is popular with XTR users who want to ride a light board in good condition for a long time.
