The milky white fin below is the "G-5"
The black fin in the middle is the "G-3"
The black fin above is the "G-1000"
"WARd3" is not shown here, but here is a photo comparing the sizes of the three most well-known types of fins in the world.
In this photo, it is difficult to tell because the overlapping fins are almost the same size.
The ``WARd3'' front fin is stacked with the ``G-5'' fin.
The front fin of the WARd3 is almost exactly the same size as the G-5.
This photo shows the WARd3 Center Fin and the G-1000 stacked together for comparison.
The same applies below.
From another side, you can see that the WARd3 center fin is longer and taller.
The center fin of the WARd3 is narrow, so
It is easier to release than the tri-fin setting of the "G-5",
This fin has better holding power than the G-3 and has performance between the G-5 and G-3.
Strong black carbon, beautiful flowing white color design, flexible and lightweight large core,
Finished with AUROLA's new blue mark.
Surfboards equipped with WARd3 are much lighter than the FCS composite fins or green flex fins that come with the board when you purchase it, making the board move quicker.
The carbon fiber fins firmly secure the base of the fin, while the top flexes smoothly, allowing you to accelerate your turns. The price of the WARd3 is 12,600 yen, and it will be available in stores from tomorrow, the 29th (Tuesday).
