We have received many reservations and inquiries about the XTR-FX board before it arrives.
thank you!
The XTR-FX is the XTR board that has taken the most time and effort to produce so far.
Stock is limited.
To check the current production progress of the precious "XTR-FX" board,
I went to Epoxy Pro's XTR factory in Oceanside, CA.
Mr. Poto, who is in charge of laminating with XTR-FX's XTR epoxy resin,
I work steadily. The "LAYZ POTATO" model is the one I get the most inquiries about.
This is the XTR-FX board with an FCSII plug fitted.
The foam is still exposed with the FCSII plug inserted and the bottom is not glassed.
From now on, we will wrap it by hand with cloth and resin just like a normal board, but once that is done,
Immediately put it in a clear bag for vacuum glass, create a vacuum, and press it over time.
The glass is adsorbed to make it as strong as possible.
Tape the fin box to prevent resin from flowing in,
You can see that additional cloth has been added and layered around the box to increase the strength of the fin box.
This is the rail part of the ``XTR-FX'' board after the vacuum glass has been completed.
The grain of the wallpaper is raised and the resin is adsorbed to the board body.
You can see the effect of the vacuum glass.
These are five precious XTR-FX boards that have been completed and will be transported to San Clemente today.
It will be airlifted from LOST this weekend and will arrive in Japan in early October.
"LAYZ POTATO"
"STEALTH II"
"SUB-DRIVER-JP"
"BEACH BUGGY"
SUB-SCORCHER II
These five models will be available.
For inquiries about what sizes are available,
For reservations and inquiries about the appropriate size of boards, please call 03-3732-5532.
https://www.luvsurf.co.jp/contact.html
Or feel free to contact us using this contact form.
