Sizes are selling out one after another! A special page for the PLACEBO "RAD DIABLO 2.0" model has been released!
A special page for the PLACEBO "RAD DIABLO2.0" model has been released!
* The excellent shape design of the LOST "RAD RIPPER" can be ridden with FLEXLITE technology.
*A Japan Limited model developed for all-around use in Japanese wave conditions.
*Equipped with PLACEBO's traditional EVW (elevator wing) to allow the thick rails to move smoothly.
*Inherits the easy and fast takeoff and paddle performance inherited from the TABLET and QUEST series
* Equipped with a dolphin grab rail for easy dolphin passage.
*Single to double concave to two channel bottom
*FCS2/5 fin plug
The famous Austrian web magazine "STAB" conducted a survey by calling 100 surf shops around the world, and found that
The LOST "Rad-Ripper" model was announced as the best-selling surfboard model in the world.
Based on that model, shaper and designer Matt "MAYHEM" Biolos retuned it specifically for the Japanese surfboard market, designed specifically for the PLACEBO surfboard market. It features the traditional PLACEBO elevator wings, which aid in the initial movement of turns and allow for a combination of nimble rail work and maneuverability.
The modest semi-beak nose shape allows the board to have volume all the way to the tip of the nose, allowing you to paddle with more weight forward, which inevitably leads to faster paddling and a quicker takeoff.
The board design has a semi-flat deck structure, so it is thick in the center, but it is easy to catch the water surface, and in combination with the semi-staped rails that are thin at the tip, you can turn on the waves as you wish.
The bottom surface design is a single, double concave, or two-channel bottom. This complex bottom design not only provides excellent gliding performance, lift, and riding speed, but also controllability that allows you to move around easily on the waves as you wish.
With a slightly wide outline, a subtle bottom rocker curve, and a semi-flat deck that makes paddling easy and stable, this board is fun to surf at any level.
The latest all-rounder model in the DIABLO series has been born, combining the good qualities of the nostalgic 80's design with a modern twist, making it easy to paddle and suitable for a wide range of conditions from small to large waves.
Aさんは、LOST『SUP DRIVER』Polyester Made in japan Quality をお選びになりました。PLACEBOサーフボードをご使用中のお客様が、リペアのご相談のためにご来店くださいました。お持ちのボードは丈夫な素材で作られていたため、表面的な傷にとどまり、修理の必要がないことが確認でき、安心されたご様子でした。その後、店内のボードをご覧になる中で、以前より気になっていたSUP DRIVERの実物をご覧いただき、「このボードであれば、よりシャープな動きが可能になりそうだ」と感じられ5'9"サイズをご購入いただきました。
Bさんは、LOST『3.0STUB DRIVER 』Polyester Made in japan Quality をお選びになりました。これまでは、今回ご購入いただいたボードと同じ6'1の長さのボードを使用されていたそうですが、最近は少し浮力のある短めのボードを使うようになったとのことです。しかし、サイズとパワーのある波でその短いボードを使ったところ、ゲッティングアウトが難しく、ライディング時にもボードの短さを感じてしまったそうです。そこで、「適度に浮力を抑えつつ、もう少し長さのあるボードが良い」と考え、ボードを探していたところ、希望に合った6'1"サイズのSUB DRIVER 3.0を見つけ、ご購入いただきました。
Cさんは、LOST『SUP DRIVER』Polyester Made in japan Quality をお選びになりました。波があればいつでも海に入れる茅ヶ崎エリアをホームとしているお客様です。最近は、ミッドレングスや『ROUND NOSE ROUND』など、浮力が多めのイージーサーフモデルでファンサーフしてたので、もっと攻めたサーフボードをお探しでラヴサーフにご来店下さいました。極端にレングスをださずに乗れるショートボードということで、『SUP DRIVER』と『THE RIPPER』で迷われましたが、日本のビーチブレイク専用で作られた日本限定モデル『SUP DRIVER』をご決断です。
Dさんは、LOST『3.0 STUB DRIVER』Polyester Made in japan Quality をお選びになりました。遠方にお住まいのお客様なのですが、いつもラヴサーフWEBストアからご購入してくださっているヘビーユーザー様です。今回はお仕事の関係で東京に来たので、忙しい合間をぬってラヴサーフにご来店下さいました。愛用してくださっているサーフボードは、RNF’96 5’8”やDRIVER3.0 5’6” 5’9”で充実したクィーバーをお持ちですが、今回はオールラウンドに使えるハイパフォーマンスモデル『3.0 STUB DRIVER』を新たなクィーバーに加えて下さいましたよ。
Eさんは、LOST『SUP DRIVER』Polyester Made in japan Quality をお選びになりました。数々のLostサーフボードを愛用いただいていましたが、しばらく他メーカーのボードにも乗ってみたそうですが、やはりロスト方が調子が良いということで、今回少しボリュームがあるボードお探しということで、こちらのサップドライバーをお選びになりました。EPSよりもPU素材の方がお好みということでしたが、プレセボのRNFスナッパーを次のボードとして検討中とのことです。
皆様!ご来店にて沢山の新品『LOSTサーフボード』Polyester Made in japan Quality をご購入ありがとうございます!