Blog
5'5" x 19 1/4": The classic "Round Nose Fish" from Lost that revolutionized all board design.
The masterpiece that revolutionized all board designs: the Round Nose Fish. Have you seen the movie "5'5" X 19 1/4"? This is how Mayhem revolutionized surfboard design. The classic "Round Nose Fish" model from Lost, which became the roots of today's short, buoyant surfboard designs. Chris Ward, Corey Lopez, Andy Irons and others are riding the big waves in Hawaii. At the time, everyone was trying to ride boards that were skinny, thin, rockered, about 6'2" long, like potato chips. It's a movie that made me realize this. The title is "5'5" X 19 1/4". The DVD version was recently restocked. If you haven't seen the original yet, be sure to check it out. http://www.luvsurf.co.jp/store/5877/ You can purchase it here. The latest version, "5'5" X 19 1/4" REDUX," was released 13 years later. http://www.luvsurf.co.jp/store/5876/ You can purchase it here. REWIND ME Lost's 5'5" X 19 1/4" It is now available on the WHAT YOUTH website, so we would like to introduce it to you. In 1966, Chris Ward called Lost shaper Matt "Mayhem" Biolos from Hawaii and said, "I want a Fish. Tom Curren's here and he's riding a Fish. I want one too." When he heard that over the phone, Matt thought about what he meant. "I sent some over and Chris picked them up," Bioros recalled. "When Chris called, I had no idea what he was talking about, but I went to a few surf shops and got inspired by '80s board designs and started working on a fishboard." As the polar opposite of the bubblegum pop tropes of Taylor Steel's films, The first album released by Lost, "What's Really Going On," Looking back at 1997, after the release of their second album, What's Really Going Wrong, The surfing industry may have been in a recovery phase. The Lost Mikes were recording their daily lives on video wherever they went. On the street, at a party, in the ocean. No skits, no staged acting. Just the real thing. At the time, surfboards had way too much rocker, weren't wide or bulky, and were tipped over like the bananas on ELF shoes, but Chris Ward and Corey Lopez were ripping up waves around the North Shore on their "little discs." While cameraman Drew Todd was following them around, they were always riding their boards, so it was amazing. Apparently he reported to Leora and Bioros, saying, "I can't believe it! What's going on?" This achievement marks the third lost video. That's when the 6'2" shortboards started to disappear and people started riding boards that were shorter than normal (2-4 inches). The film takes you by surprise because it's an original (no elaborate editing) that goes at everything - waves of any size. Check it out as we talk with Mike Leola and Matt Biolos about the new RewindMe featuring 5'5" x 19 1/4 and other weird stuff. (Click below to play) * Posted by Luvsurf .
Learn moreIntroducing the one and only Placebo 5'8" SCORCHER with FLEXLITE-TURBO/FCS II!
The only one in the world! Introducing the Placebo 5'8" SCORCHER FLEXLITE-TURBO/FCSII specification! This board is currently the only one produced in the world. Sales start today. But there's only one, so it's first come, first served. The "SCORCHER" model is not a current model, It features the latest FLEXLITE-TURBO structure, and the fins are FCSII specifications, which have been adopted since 2014! The board size is 5'8"! 5' 8” x 18 1/4” x 2 1/8”(173 x 46.3 x 5.4cm) 50~60kg 23.4cl For those who have been riding it before and felt good about it, and would like to ride it again, Is there anyone out there who wanted it but gave up because they thought it was no longer on sale??? The board size is small, so it is suitable for those who are light in weight and looking for a sturdy board, I think female surfers will also be able to ride this model in this size. Features of the "SCORCHER" model -High performance TRI fin that is also great for beach breaks. ・An all-round turnboard that combines driving functionality with carving performance! ・For those who want to make carving turns even on regular small waves! ・For intermediate and above level. ・Recommended size is from waist to half a head. Placebo 5'8" SCORCHER FLEXLITE-TURBO/FCS II 5' 8” x 18 1/4” x 2 1/8”(173 x 46.3 x 5.4cm) 50~60kg 23.4cl ¥123,000 (excluding tax) / ¥132,840 (including tax) If you would like to purchase this one-of-a-kind 5'8" SCORCHER board, Please call 03-3732-5532 or http://www.luvsurf.co.jp/contact.htm l Please contact us using this inquiry form. If you want to ride, please make your decision quickly. There is only one available! Please also check out this riding video! [vimeo]http://vimeo.com/24442450[/vimeo] * Posted by Luvsurf .
Learn moreIntroducing "HYDROFLEX-EFC" *White* epoxy resin color board.
Introducing the "HYDROFLEX-EFC" white epoxy resin color board. This is the "HYDROFLEX-EFC" board that I've been recommending for a while now. This board comes in a white epoxy resin color. Epoxy resin, which is said to be prone to yellowing, can be treated with "HYDROFLEX-EFC" in this way. The white color is mixed with the epoxy resin and then 3D vacuum glass is applied. Yellowing is not noticeable, so you can ride your board for a long time in a clean condition. The board is so strong that it almost never peels off, and even if SHAW or MASATO air blows it, it doesn't dent the deck. The surface strength of the board is strong, so it can be ridden for an amazingly long period of time. We recommend custom ordering your board with resin color. This board is entirely in white, Original colors and color coding are also possible, so please consider it. Posted by Luvsurf .
Learn moreNew Luvsurf TV: LOST 『CONQUEST EL-DIABLO』Koji Nishii Koji Nishii
Luvsurf TV: LOST "CONQUEST EL-DIABLO" Koji Nishii Rider: Koji Nishii Board used: LOST 5'7" CONQUEST EL-DIABLO HydroFlex EFC FILM: Hayato Masuda EDIT: TABRIGADE FILM The 2014 Japan-exclusive "CONQUEST EL-DIABLO" model is designed for Japanese senior surfers over 40 years old. This is a collection of Nishii's riding on the new material "HYDROFLEX-EFC". The speed and ease of take-off, the light movement, the acceleration of the board, Watch as the board fits and surfs the wave with each turn. The take-off performance has been inherited from the previous model "CONQUEST" and has been surpassed. The grab rail prevents the wear and tear of dolphin-diving. When you want to perform some action, the squash tail behind the wing is thin so you can easily control it with your back foot. The HYDROFLEX-EFC board has a smooth, supple ride, and the board flexes as it is pushed into the wave, surpassing the POLY board. The smooth flex allows for great turns. It is as light as the Polyester WCT level pros use it. According to the HYDROFLEX announcement, it is strong enough that there is no need to worry about peeling during normal use. The 100% waterproof "HYDROFLEX-EFC" board has foam that does not absorb water. You'll be riding your board for years to come, feeling as light as when you first bought it. It can be used for a long time and has a high resale value when you let it go, so although it is an expensive board, it is recommended for senior surfers who can afford it. Please add this to your list of materials for your next board of consideration. The ride of boards made from "HYDROFLEX-EFC" material is excellent. It is equipped with a high-performance suspension and an engine that accelerates with a good balance of power and weight. You can surf with the feeling that you are riding in a luxury sports car with excellent safety. The CONQUEST EL-DIABLO model was designed and developed for surfers over 40 years old. Its pointed nose and powerful takeoff performance will blow away younger surfers, and it's a performance board for adults who want to rip and ride. Give it a try! [vimeo]https://vimeo.com/104783321[/vimeo] Posted by Luvsurf .
Learn moreThe SUB-BUGGY is a hybrid model that combines the best features of the classic Sub Driver and the outstanding Beach Buggy.
Information on the late 2014 new model. We are currently preparing to post detailed photos of this board and a description of the model on our website. When will stock boards be available? (Early boards will be ready from early November.) Or, I'd like to make a custom order, so please let me know your recommended board size and CL value! We have received inquiries from LOST surfboard enthusiasts who are always on the lookout for new products, such as: We will first announce any information that can be made public. "SUB-BUGGY" Mayhem recently collaborated with Kolohe on a new model. This hybrid model combines the best features of the classic "Sub Driver" and the outstanding "Beach Buggy." The waves are small, but it is designed to provide high performance and allow you to ride both good and bad waves. *Competitors ride it for competitions, *This new model is recommended for free surfers who want to do high performance surfing. Adjust the board foil to surf fast and with rails. This board allows you to clearly see the performance effect of the board even in poor quality waves. A blended board that combines the rocker of the Beach Buggy with the Sub Driver and re-adjusted outline. This board was created after numerous refinements by Kolohe during prime events and during his time on the World Tour. The board's high performance even in below average quality waves helped Kolohe improve his contest results. It's a testament to the performance of this board. Team riders other than Kolohe began to need it so they could have an advantage in small wave contests. It's also becoming popular with Southern California locals, who are always looking for something new. Recommended for those looking for a board with better maneuverability than the SUB-DRIVER. STANDARD dimensions are for people with average builds SLIM dimension is for those with small eyes and light weight. DOMESTIC dimensions are board sizes for heavier or larger boarders. Price POLYESTER Center Stringer ￥130,000 (excluding tax) POLYESTER Carbon Tail Patch ￥135,000 excluding tax XTR-FX ￥180,000 excluding tax HydroFlex EFC ￥180,000 excluding tax Custom orders are possible! Posted by Luvsurf .
Learn moreCYBER Wetsuit Autumn/Winter Early Order Campaign! Until September 7th! Don't miss out!
CYBER Wetsuit Autumn/Winter Early Order Campaign ■ Announcement of early campaign for autumn/winter suits ■ The offer is valid until September 7th. Don't miss it! ★If ready-made sizes fit you, this is the best value and recommended! We are now accepting orders for a limited edition NO-ZIP model in ready-made sizes made with high-performance heat-generating material at a *special price*! This is the winter version of the "502limited" model, which is very popular in spring and summer! You can choose from five sizes: M, ML, MLB, L, and XL, and from A, B, and C types of marks. 5x3 high performance brushed fabric is only 54,800 yen + tax! --------------------------------------------------------------------------------------------------------- ★If you want a fully custom-made item with quality fabric that is worth more than the price, this is the one for you! The price for this fabric is really cheap! The "602 LIMITED model" made with high-performance heat-generating material is available for a limited time at the order fair! Bonus: No ordering fee, just 5 x 3...70,000 yen + tax, also cheap!!! --------------------------------------------------------------------------------------------------------- ★Recommended for those living in cold areas! 2014 WINTER DRYSUITS If you order DRYSUITS, you will receive a low-absorption thermal inner short J (value: ¥15,000) as a gift! (If the innerwear is sold out due to a large number of orders, the fair will end at that point.) --------------------------------------------------------------------------------------------------------- Those who decide early can get a much better deal than after the season starts, so If you were planning to purchase a full suit this season, this is definitely a great deal, so be sure to take advantage. Orders can be placed at Love Surf stores, by phone or email. First of all, please feel free to consult with Nishii or the Love Surf staff. Don't miss out on this great early sale on fall/winter suits! Posted by Luvsurf .
Learn moreThis is cutting edge technology! You can see and touch the HYDROFLEX-EFC board at Love Surf.
This is cutting edge technology! You can see and touch the "HYDROFLEX-EXTRUDED FLEX CORE" (commonly known as EFC) board at Love Surf. Recently, we have been displaying Nishii's two personal boards, the 5'7" CONQUEST-EL-DIABLO and the 5'2" SHORT ROUND, at our Love Surf store so that you can easily pick them up. Everyone who picks it up is amazed at how light it is. This board is incredibly light, like the boards used by WCT pros, with a flex even softer than POLY, and resilient strength that won't break or break even when ridden bottom-up. It's garnering rave reviews, so please come and see it for yourself! Many customers who have actually tried this board have custom-ordered it in their ideal model and size! Seeing it in person is a thrill, and it's a board that everyone will want to ride! It offers incredible flex, even more than POLY, and is crafted using a unique vacuum glassing method developed in Germany called Hydro 3D Glass. Countless small holes are drilled into the 100% waterproof foam (blank), allowing epoxy resin to penetrate deep into the foam like roots. "The foam and glass are integrated, so there's no need to worry about peeling," says Richie, president of Hydroflex. Nishii, Shaw, and Masato have all ridden EFC boards without any peeling or even footprints. There's not even a chin mark on the nose deck. But it's supple! The surface is so strong that the WHITE POLY PRO tail patch on the board is not needed. Since you will be riding it for a long time, we recommend adding resin stain color to prevent the yellowing of the epoxy resin from being noticeable. This is the clear part of the 5'7" CONQUEST-EL-DIABLO. The stringer is made of just one piece of thin black wood, which is also one of the secrets to its flexible structure. Here, the gray is used as a translucent resin tint color to make the yellowing less noticeable. Nishii recommends the white resin tint color. Up to three colors can be applied to the entire board for 20,000 yen (excluding tax). These two boards are always on display, so please come and take a look at these cutting-edge boards - Nishii's personal boards, the 5'7" CONQUEST-EL-DIABLO and the 5'2" SHORT ROUND. For now, the HYDROFLEX-EFC is only available for custom orders. It currently takes about four months from the time an order is placed until completion, and the price is the same as the XTR-FX. Please come to the store and take a look at this ultra-cutting edge surfboard. For customers who live far away and cannot visit the store, custom orders can also be placed by phone at 03.3732.5532 or via the inquiry email form, so please consider it. EFC is lightweight, making it the perfect material for thick, large, uncle models. Above all, it feels great to ride, so Nishii recommends it with confidence! * Posted by Luvsurf .
Learn moreThe "SHORT ROUND" XTR-FX is now in stock! Don't miss out on this rare arrival!
This is LOWERS. The sizes have increased dramatically and it's very popular. The conditions were clear and windless, with clear skies. Kei-kun also appeared and stood out among the adult PROs wearing the ``V2-SB'' model. From left Dusty Pain (MAYHEM) Jordy Smith, not clear, Photographer-san, Ian Walsh (MAYHEM) Kolohe, who appears later, is in the ocean. Nishii is 5'2" SHORT ROUND. He was in the center because of his size. Equipped with AUROLA "SMALLISH" fins to improve drive performance. Following on from yesterday, here is the latest arrival information from Luvsurf! NEW 2014! The latest and most popular model is made with high-end XTR material! "SHORT ROUND" XTR-FX/FCSII specification now available! High-end materials for the popular model! "SHORT ROUND" XTR-FX/FCSII specification now available! This is an XTR board specification exclusive to Japan, with the strongest strength and performance in the history of XTR boards! ★Click here to see the introduction to the "SHORT ROUND" model. The XTR-FX board is strong and shock-resistant, yet very flexible and resilient. Not only that, but the performance is also excellent, making it the strongest jumping board in the history of XTR boards. The result is a super speed flex XTR board that bounces up. The XTR foam used inside the XTR-FX is a one-piece structure, The foam does not absorb water, so it remains surprisingly light for long periods of riding. LOST 『SHORT ROUND』XTR-FX SQUASH TAIL/5 FIN FCS II/ 5 FCSII fins included ¥190,000 (excluding tax) / ¥205,200 (including tax) ▼Size lineup #131903 5'3”x 19 3/8”x 2 3/16”(160 x 49.3 x 5.55 cm) 50~60kg 25.01cl #131905 5'4”x 19 1/2”x 2 1/4”(163 x 49.5 x 5.7 cm) 55~63kg 26.31cl #131909 5'5”x 19 5/8”x 2 5/16”(165 x 49.8 x 5.85 cm) 58~67kg 27.31cl #131913 5'8”x 20” x 2 1/2”(172 x 50.8 x 6.35 cm) 70~80kg 30.51cl To purchase from the web store, click here Size lineup and detailed images of each size>>Click here ★Don't miss out on this rare arrival! ★We will also be contacting customers and retailers who have made pre-orders in advance of the arrival of the product. You'll be able to ride it during the upcoming Obon holidays, so don't miss out on this latest arrival! * Posted by Luvsurf .
Learn more