Blog
The latest MICK FANNING signature fin, the NEO CARBON, is now in stock!
It has already become a hot topic since its release. The latest material for Mick Fanning's signature fins is "NEO CARBON"! Among the many fins available, this signature fin is currently the one that is receiving the most inquiries! Price: ¥12,000 (excluding tax) 3 sheets per set ◆Size: 『L』 Base: 114mm Depth: 119mm Area: 10131m㎡ Sweep: 36.0° What is "NEO CARBON"? This is a new material that incorporates carbon into the high-performance glass material "Neo Glass." This is the latest high-performance material that retains the lightness and softness of Neo Glass while adding the rebound properties unique to carbon. It comes in size "L". The size of the L size is The moderately large dimensions provide excellent stability and drive performance, while the bevel foil allows for quick turns. ★Recommended for those who: For those who want big, powerful turns at high speed, For those who want to power surf like Mick Fanning! Please try out our fins made from the latest materials! Now that we have all the stock, hurry up and get yours!! ★'FCSll' MF-NEO CARBON /TRI fin L size >>Click here for details and to purchase!
Learn moreKamogawa Marquis' Waves and New PLACEBO Model!
Hello everyone. This is Yuji, a staff member. I went to Kamogawa Marquis the other day, so I would like to report on the waves there and a test ride report on the new PLACEBO model. The size of the marquis on this day was about kata. The wind was blowing moderately from the north to northeast. The waves were big and the surface was beautiful, but there were a lot of fast breaks and even experts had a hard time getting through them. However, if you could catch the occasional gap in the waves, you could get two or three actions. On this day, I ended up accompanying Pro Nishii on a photo shoot, and was able to borrow a PLACEBO ZEKE 5'5" for the shoot. On the left is the PLACEBO "DIABLO-X" 5'8" that Pro Nishii used for the shoot that day. On the right is the "ZEKE" 5'5" that I borrowed. By the way, I tried the fin setting of "KAI SALLAS 6.5" with "CARVER QR SIDE S" single + 2. My first impression after actually riding it was that the takeoff was incredibly fast. It was definitely faster than the Goblin, which was considered the strongest small wave model. I wonder if that's due to the outline with its increased water contact area, or the effect of the large center fin, or both. I'm not sure, but it was definitely fast. What is particularly noteworthy about the ZEKE is its strong straight-line stability. The GOBLIN was able to turn quickly despite its high buoyancy, so it was able to gain speed quickly even in small waves, but the ZEKE has such strong straight-line stability that it accelerates even when just going straight. This is probably due to the large fins, rocker and rocket tail, which allows for rapid acceleration even with a slight weight shift. When turning, the elevator wing moves in and the large fin acts as a pivot point, allowing for sharp turns while maintaining speed. The best conditions at Marquis that day were the occasional kata-sized outboard sets, but there weren't many of them, so I left that to Nishii and aimed for the mid-section belly-sized waves. The break was close to the inside damper, and everyone around me was struggling to get through, but with the ZEKE it was no problem. It takes off one beat earlier and then runs sideways, its strong straight-line ability allowing it to overcome the soup, and once it has gained speed it makes a sharp turn for a solid action. Anyway, I thoroughly enjoyed it. By the way, the center fin worked best when it was in the middle of the box. When placed further back, this center fin provides increased stability and straight-line tracking, and creates a strong pivot when turning. On the other hand, if you attach it closer to the front, the stability and straightness will decrease, but the club will become looser and have better rotation. In my case, I wanted straight-line stability, but I was worried about my leg strength, so I moved it a little forward. I think this is a matter of personal preference. You can easily move your position while waiting for waves, so you can try out different things on the spot. That's one of the joys of the ZEKE . The fun and new ZEKE PLACEBO is especially recommended for those considering a small wave board! Well, I'll report back to you soon. Thank you! ★Click here for an explanation of the PLACEBO "ZEKE" model! ★Purchase PLACEBO "ZEKE" >>here!!
Learn moreWe have a limited stock of these rare, precious kids-sized used boards in stock!
If you're looking for kids' sizes, don't miss this! We have a limited supply of rare kids-sized used boards in stock! ▼ Used LOST 5'5" "POCKET ROCKET" POLYESTER / Fuse Carbon Bottom ROUND TAIL / 3FINS / FCS ll FIN This is a used "POCKET ROCKET" super high performance model designed for winning. This board was used by a LOST kid rider and has no major scratches, making it a great bargain that can still be used. ★LOST's "POCKET ROCKET" model introduction page can be found here! LOST 5'5”『POCKET ROCKET』POLYESTER / Fuse Carbon Bottom ROUND TAIL / 3FINS / FCSll FIN ¥59,000 Approximately B (New price ¥159,840) #161929 5'5″x 16.12″x 2.0″ (165 × 40.6 × 4.8 cm) 25-40kg 18.37cl ▼ Used LOST 5'2.5" "MINI DRIVER" POLYESTER / Carbon Tail patch ROUND TAIL / 3FINS / FCS ll FIN This is a used "MINI DRIVER" for kids, a classic high-performance model from "DRIVER." This board was used by a LOST kid rider and has no major scratches, making it a great bargain that can still be used. LOST 5'2.5”『MINI DRIVER』POLYESTER / Carbon Tail patch ROUND TAIL / 3FINS / FCSll FIN ¥59,000 Approximately B (New price ¥156,600) #3umd52 5'2.5″x 17.25″x 2.11″ (159 × 43.8 × 5.4 cm) 30~45kg 20.5cl ▼ Used LOST 5'2" "POCKET ROCKET" POLYESTER / Carbon Tail patch + Fuse Carbon Bottom ROUND TAIL / 3FINS / FCS ll FIN This is a used low-volume, super high-performance model, "POCKET ROCKET." This board was carefully used by female rider Anon Matsuoka and is in very good condition. Good quality used kids' size boards are rarely available, so they are very valuable. ★Click here to visit the ``POCKET ROCKET'' model introduction page! LOST 5'2”『POCKET ROCKET』POLYESTER / Carbon Tail patch + Fuse Carbon Bottom ROUND TAIL / 3FINS / FCSll FIN ¥79,000 AB (New price ¥165,240) #159542 5'2″x 16.0″x 1.9″ (157 × 40.6 × 4.8 cm) 20~35kg 17.0cl ▼ Used LOST 4'11" "V2-GRINDER" POLYESTER / WHITE POLYPRO TAIL PATCH SQUASH TAIL / 3FINS / FCS ll FIN This is a used, multi-purpose, high-performance model, the "V2-GRINDER." This board was used by a LOST kid rider and has no major scratches, making it a great bargain that can still be used. LOST 4'11" "V2-GRINDER" POLYESTER / WHITE POLYPRO TAIL PATCH SQUASH TAIL / 3FINS / FCSll FIN ¥59,000 Approximately B (New price ¥156,600) #153782 4'11″x 17.2″x 1.9″ (150 × 43.7 × 4.8 cm) 25-40kg 18.5cl They are already available in the store, so please come and see them! If your size fits, don't miss out!!! ★You can see all our used boards >>here!
Learn more"LOWTIDE" T-shirts from Oceanside, Southern California are now in stock!
Following the CAP, "LOWTIDE" T-shirts from Oceanside, Southern California are now in stock! The caps sold out immediately, but the T-shirts are sure to sell out as well! Don't miss out! This "LOWTIDE" is only available in a handful of surf shops, It's a core brand that only those in the know know! "LOWTIDE" features a logo that looks like it was painted with paint. The T-shirt is well made and extremely comfortable to wear. ▼“LOWTIDE” TEE [LT STACKED STANDARD TEE] WHITE Price: ¥4,500 (+tax) ◆Color: 『WHITE』 ◆Size: 『M』 ◆Material: 100% COTTON ▼“LOWTIDE” TEE [LT STACKED STANDARD TEE] BLACK Price: ¥4,500 (+tax) ◆Color: 『WHITE』 ◆Size: 『M』 ◆Material: 100% COTTON Wear this and you'll look like a California expert! Don't miss out on the "LOWTIDE" T-shirt! ★You can get the ``LOWTIDE'' T-shirt here>>>!
Learn moreGreat deal!! Used PLACEBO boards arriving one after another! First come, first served!
We've been receiving a steady stream of great deals on used PLACEBO boards ! All items are first come, first served, so if you have the right size, be sure to check it out! ▼ Used PLACEBO 5'6″ “GOBLIN-SPRINT” FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN This is a used copy of "GOBLIN-SPRINT," a new game that adds channels to the classic "GOBLIN." It was handled carefully as a test board, so it is a used board in good condition with no noticeable scratches. Since it was made as an early sample, the mark is "GOBLIN". Get a great deal on a used copy of the popular "GOBLIN-SPRINT" - first come, first served! ★Click here to go to the "GOBLIN-SPRINT" model introduction page! PLACEBO 5'6″ “GOBLIN-SPRINT” FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN ¥89,000 AB (New price ¥149,040) #pghy56 5'6″x 20.38″x 2.68″ (168 × 51.8 × 6.8 cm) 50-75kg 35cl ▼ Used PLACEBO 5'10″ “EL-DIABLO PLUS” FLEXLITE-HYPER ELEVATOR WING SQUASH TAIL / R-2C / 5FINS / FCS ll FIN This is a used "EL-DIABLO PLUS" that can be used as a main board for all-purpose play. It was handled carefully as a test board, so it is a used board in good condition with no noticeable scratches. Used EL-DIABLO PLUS models are in high demand among a wide range of people, making them a rare find. The bargain-priced "EL-DIABLO PLUS" is available on a first-come, first-served basis! ★Click here to visit the ``EL-DIABLO PLUS'' model introduction page! PLACEBO 5'10″『EL-DIABLO PLUS』FLEXLITE-HYPER ELEVATOR WING SQUASH TAIL / R-2C / 5FINS / FCS ll FIN ¥89,000 AB (New price ¥149,040) #eldphy510 5'10" × 20.00" × 2.50" (178 × 50.8 × 6.35cm) 60-72kg 31.5cl ▼ Used PLACEBO5'8″ "GOBLIN-SPRINT" FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN Two channels are attractive. This is a used copy of the new "GOBLIN" series, "GOBLIN-SPRINT." It was handled carefully as a test board, so it is a used board in good condition with no noticeable scratches. Since it was made as an early sample, the mark is "GOBLIN". Get a great deal on a used copy of the popular "GOBLIN-SPRINT" - first come, first served! ★Click here to go to the "GOBLIN-SPRINT" model introduction page! PLACEBO5'8″『GOBLIN-SPRINT』FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN ¥89,000 AB (New price ¥149,040) #pghy58 5'8" x 20.63" x 2.88"(173 x 52.4 x 7.3cm) 60~85kg 39.0cl ▼ Used PLACEBO6'0″ ``EL-DIABLO PLUS'' FLEXLITE-HYPER ELEVATOR WING SQUASH TAIL / R-2C / 5FINS / FCS ll FIN This is a used all-round model "EL-DIABLO PLUS" that can be played in multiple ways. It was handled carefully as a test board, so it is a used board in good condition with no noticeable scratches. Used EL-DIABLO PLUS models are in high demand among a wide range of people, making them a rare find. The bargain-priced "EL-DIABLO PLUS" is available on a first-come, first-served basis! ★Click here to visit the ``EL-DIABLO PLUS'' model introduction page! PLACEBO6'0″『EL-DIABLO PLUS』FLEXLITE-HYPER ELEVATOR WING SQUASH TAIL / R-2C / 5FINS / FCS ll FIN ¥89,000 AB (New price ¥149,040) #eldphy60 6'0" × 20.38" × 2.62" (183 × 51.8 × 6.65cm) Beginner ~ 78kg 34.5cl ▼ Used PLACEBO5'4″ “GOBLIN-SPRINT” FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN This is a used copy of the new "GOBLIN-SPRINT" from "GOBLIN," which has high buoyancy and quick movement. This is a board that Pro Nishii used frequently, and you can see how well it works from the video below. Since it was made as an early sample, the mark is "GOBLIN". Get a great deal on a used copy of the popular "GOBLIN-SPRINT" - first come, first served! ★Click here to go to the "GOBLIN-SPRINT" model introduction page! PLACEBO5'4″ “GOBLIN-SPRINT” FLEXLITE-HYPER SUPER SWALLOW TAIL / R-2C / 5FINS / FCS ll FIN ¥89,000 Approximately B (New price ¥149,040) #pghy54 5'4″x 20.13″x 2.56″(163 × 51.1 × 6.5 cm) 40~65kg 32cl In addition to the boards we introduced, we also have used boards in stock! Don't miss out on this latest arrival!!! ★You can see all our used boards >>here!
Learn moreThe easily foldable "TLS" horizontal surfboard stand is back in stock!
A popular item that was sold out! The " Horizontal Surfboard Stand " that combines stability and luxury is back in stock! This stand allows you to safely perform waxing and fin installation. It can withstand a weight of up to 100 kg. It can be easily folded, so it becomes compact when stored in the car and doesn't take up much storage space! ▼'TLS' horizontal surfboard stand Price: 4600 yen + tax Size: W: 50cm D: 40cm H: 33cm Weight: 1.7 kg (weight of one chair) Storage bag included In addition to these, all "Phix Doctor" products are back in stock! It's a good idea to have some handy repair products on hand in case of an emergency. ★For a list of all repair supplies, click here! ★All surf goods can be found here!
Learn moreThe latest signature models of "FCSll" "JW Fin" and "MF Fin" are now in stock!
The latest FCS II signature fins are now in stock! First up is the JULIAN WILSON signature fin! 20% lighter than conventional PC fins! Ultra-lightweight material made from epoxy resin! The FCS II JW-PC + AirCore/TRI fin has been upgraded to PC material with ultra-light AirCore! The focus is on air launch, more aggressive approaches, and ample control in large arc turns. https://youtu.be/-P9j-P0SYrc ▼『FCS II』JW-PC + AirCore/TRI Fins [JULIAN WILSON] GROM Size Price: 15,000 yen + tax ◆Size: 『GROM』 ◆ 3 pieces in a set ◆Color: BLUE *Striped on the front and patterned on the back ▼ThrusterGROM size Base: 104mm Depth: 106mm Area: 8264m㎡ Foil: FLAT/BEVEL Sweep: 35.8 ▼『FCS II』JW-PC + AirCore/TRI Fins [JULIAN WILSON] M size Price: 16,000 yen + tax ◆Size: 『M』 ◆ 3 pieces in a set ◆Color: ACID *Striped on the front and patterned on the back ▼Thruster M size Base: 113mm Depth: 116mm Area: 9763m㎡ Foil: FLAT/BEVEL Sweep: 35.8 ▼『FCS II』JW-PC + AirCore/TRI Fins [JULIAN WILSON] L size Price: 16,000 yen + tax ◆Size: 『L』 ◆ 3 pieces in a set ◆Color: ORANGE *Striped on the front and patterned on the back ▼Thruster L size Base: 116mm Depth: 119mm Area: 10262m㎡ Foil: FLAT/BEVEL Sweep: 35.8 Next up is the "MICK FANNING" signature fin! This is "Neo Carbon," a new material made by kneading carbon into the high-performance glass material "Neo Glass." It is a cutting-edge high-performance material that retains the lightness and softness of "Neo Glass" while adding the unique resilience of carbon. Suitable for power surfing, who prefer carving and strong fin rebound! FCSll MF-NEO CARBON / TRI fin [MICK FANNING] L size Price: 12,000 yen + tax ◆Size: 『L』 ◆ 3 pieces in a set ▼Large size Base: 114mm Depth: 119mm Area: 10131m㎡ Sweep: 36.0° https://youtu.be/QnTIBVmDP2A Be sure to check out the latest fins to go with your new board! ★Click here to find the latest ``FCS ll'' fins!
Learn moreO'NEILL's early bird and late bird order campaign starts today! Until March 24th!
Limited time offer! Until March 24th (Sun)! "O'NEILL" early bird and late bird order campaign starts today! ◆◆Campaign benefits◆◆ If you order a custom-made suit during this period, 10% off the base price! *The HEAT series is not eligible for the campaign. In addition to the [Early Bird] discount that applies to the new 2019 Spring/Summer lineup, The campaign also applies to the 2018 Fall/Winter models! [Late Discount] is also being held at the same time! This offer is only available until Sunday, March 24th, so don't miss out! The latest O'Neill 2019 Spring & Summer catalog has arrived, so be sure to check it out when you visit our store! ★If you have any questions about purchasing or campaigns, please feel free to contact us here!
Learn moreThe "UBER DRIVER" stockboard, the shortest model in the DRIVER series designed for small waves, is now available!
The shortest model in the DRIVER series, designed for small waves! LOST "UBER DRIVER" stockboard now in stock! ▼The sizes available are here!! LOST “UBER DRIVER” POLYESTER / Carbon Tail Patch SQUASH TAIL / 3FINS / FCSll FIN Unit: ¥145,000 #193905 5'6″x 18.63″x 2.32″(168 × 47.3 × 5.9cm) 26.0cl Intermediate 50-55kg Advanced 55-60kg #193906 5'7″x 18.75″x 2.35″(170 × 47.6 × 5.95cm) 27.0cl Intermediate 55-60kg Advanced 60-65kg #193907 5'8″x 19″x 2.38″(173 × 48.3 × 6.0cm) 28.25cl Intermediate 60-65kg Advanced 65-70kg #193908 5'9″x 19.25″x 2.4″(175 × 48.9 × 6.1cm) 29.25cl Intermediate 65-70kg Advanced 70-75kg ■ "UBER DRIVER" model explanation This is one of the high-performance series that can be used in local competition scenes where there are many small waves. This board is designed for surfers who love ripping and is based on the DRIVER series. The UBER DRIVER is designed as a design board that is somewhere between a high-performance and hybrid model. The widest point nose design in the DRIVER series is your ultimate weapon in small waves. The front half of the board inherits the nose outline from the "SHORT ROUND", while the rear half is a mix of the SUB-DRIVER tail design. This board was designed for those looking for the performance of a DRIVER, to give them an advantage in small heat waves that the DRIVER won't handle. The gentle nose rocker allows for easy paddling, quick takeoff, and a quick line. We recommend that the board length be 2 to 4 inches shorter than normal, 4 inches shorter than the "DRIVER", 2 to 3 inches longer than the "SUB-DRIVER", and a little wider. MAYHEM of LOST, a world-class, cutting-edge surfboard designer who has sent five surfers to the 2018 WSL Men's and five to the Women's, has developed this smallest wave model in the Pro-Performance series based on the DRIVER, while retaining the athletic performance of the SUB-DRIVER, to give competitors from around the world an advantage in small waves.It is a must-have for competitive surfers. If you're interested, be sure to try out LOST's popular model! ★LOST "UBER DRIVER" Pro-fromance Series stockboards are available >>here!
Learn more
