Blog
The appropriate size for LOST's new model "THE BLUNT" has been revealed!
LOST 2010 New Model The correct size for "THE BLUNT" revealed! 5'4" x 19 1/4"x 2 1/8" (163 x 48.9 x 5.4 cm) 55-60kg 5'6" x 19 1/2"x 2 3/16" (168 x 49.5 x 5.55cm) 58-63kg 5'8" x 19 3/4"x 2 1/4" (173 x 50.1 x 5.7 cm) 63-68kg 5'10"x 20" x 2 5/16" (178 x 50.8 x 5.85cm) 65-73kg 5'11"x 20 1/8"x 2 3/8" (180 x 51.1 x 6.0 cm) 68-77kg 6'0" x 20 1/4"x 2 1/2" (183 x 51.4 x 6.35cm) 75-80kg 6'1" x 20 3/8"x 2 5/8" (185 x 51.8 x 6.5 cm) 78-83kg Specifications: ROUND TAIL, 5 FIN-FCS, 5 fins included Price ■ Polyester ￥135,000 (excluding tax) / ￥141,750 (including tax) ■ Polyester Parabolic Stringer ￥145,000 (excluding tax) / ￥152,250 (excluding tax) ■ Dual Density Parabolic XTR ￥180,000 (unit) / ￥189,000 (tax included) ■ XTR 3D CARBOLIC ￥180,000 (excluding tax) / ￥189,000 (excluding tax) Stock boards will be available from mid-March. Custom orders are also accepted! http://www.luvsurf.co.jp/board/custom_order.html For more on Brandt, check this out! http://luvsurf.co.jp/24sblog/?p=1881
Learn moreMayhem wins another STAB MAGAZINE AWARD
Mayhem wins another STAB MAGAZINE AWARD! THE 2009 STAB AWARDS Below I will share some of the information I have written briefly with you all. The FISH board I designed 15 years ago, The RNF 5'5" x 19 1/4" is wide and has a narrow tail. It still influences people like Dane and Kelly. The current Dane is Ward/Cory Lopez from 15 years ago. You're doing the same thing. It's the 15-year cycle rule . 15 years ago there was Chris Ward/Cory Lopez; Now we have Kolohe Andino, right? The boards of the shapers who have been very successful on the WCT tour are It's just a board for WCT riders. For example, Simon (Anderson) Jason (Stevenson, JS) Darren (Handley, DHD) I'm a big guy, but I can't surf the 2-foot break in front of my house. I'm good at designing the boards that I need. If you can't catch a wave, you can't surf. And if you can't skate fast, you can't do anything. Even if you can ski fast, it's no use if you can't control your maneuvers. When it comes to board design, the bottom line is the most important thing. A surfboard is something that can catch a lot of waves, It needs to be fast and easy to control. Chris Ward is no longer on the WCT Tour, He's one of the top five surfers in 6-10 foot waves. I just turned 31 and I have high hopes for the future. LOST has become a bigger brand than before, Unlike other big brands, we don't go outside the surf shop. We will continue to be the most core brand that continues to make its own surfboards . Good luck Mayhem! This year marks the 15th anniversary of Love Surf's opening!
Learn moreLOST [SCORCHER] FST sizes revealed! Pre-orders open!
LOST [SCORCHER] FST model Material: FST (FIREWIRE) Specifications: TRI FIN-FCS, SQUASH TAIL. Includes three lightweight fins for FST. Price: ¥168,000 (excluding tax) / ¥176,400 (including tax) Expected arrival date: mid-April 2010 5' 5" x 17 3/4" x 2" (165 45.0 5.1 cm) 45-55kg 5' 7" x 18" x 2 1/16" (170 45.7 5.25 cm) 53-60kg 5' 9" x 18 1/4" x 2 1/8" (175 46.3 5.4 cm) 57-65kg 5'11" x 18 1/2" x 2 3/16" (180 47.0 5.55 cm) 62-68kg 6' 0" x 18 3/4" x 2 1/4" (183 47.6 5.7 cm) 66-74kg 6' 1" x 19" x 2 5/16" (185 48.2 5.85 cm) 70-77kg 6' 2" x 19 1/4" x 2 3/8" (188 48.9 6.0 cm) 75-80kg Pre-orders are now open for the LOST [SCORCHER] FST model before it arrives! The special page for the LOST [SCORCHER] model can be found here. http://www.luvsurf.co.jp/camp/scorcher.html This LOST [SCORCHER] model is now available in FST (FIREWIRE) material! What is FST (FIREWIRE) material? http://www.luvsurf.co.jp/board/material.html 2010 new model [SCORCHER] FST. Scheduled to arrive in mid-April. To reserve, Call us at 03-3732-5532 or http://www.luvsurf.co.jp/contact/contact.php Please apply using this form! Please feel free to use this form to inquire about sizes!
Learn more[AIRQUEST] model now available in FLEXLITE material!
[AIRQUEST] model, This is a Japan-exclusive model made with FLEXLITE material! First reveal! Placebo [AIRQUEST] FLEXLITE board images! Placebo [AIRQUEST] model (Japan limited model) Material: FLEXLITE Specifications: 5FIN-FCS, DEVIL TAIL. Price: ¥138,000 (tax included). Expected arrival date: end of March 2010 5'4" x 19 1/4" x 2 1/16" (163 x 48.9 x 5.25 cm) 50-63kg 5'6" x 19 1/2" x 2 1/8" (167 x 49.5 x 5.4 cm) 58-68kg 5'8" x 19 3/4" x 2 1/4" (173 x 50.1 x 5.7 cm) 65-75kg 5'10" x 20" x 2 3/8" (178 x 50.8 x 6.0 cm) 73-83kg [AIRQUEST] Pre-orders are now being accepted before arrival! Every year, new Presebo models are flooded with pre-orders for about a year after their release. It is so popular that it is hard to find in stores and difficult to get hold of immediately after it is released. (Last year it was the TABLET and ROCKET.) It has a reputation for being very comfortable to ride and is made of durable and long-lasting FLEXLITE material. The Japan-exclusive model has the exact same shape and design as *LOST*. If you choose the super popular model [AIRQUEST], As in previous years, the first shipment will be fully booked, so If you are interested, please consider making a reservation as soon as possible. The special page for the LOST [AIRQUEST] model can be found here. http://www.luvsurf.co.jp/camp/airquest.html This [AIRQUEST] model is made of FLEXLITE material and is available as a Japan-exclusive model! 2010 new playbo model [AIRQUEST] is scheduled to arrive at the end of March. To reserve, Call us at 03-3732-5532 or http://www.luvsurf.co.jp/contact/contact.php Please apply using this form! Please feel free to use this form to inquire about sizes!
Learn moreX-GEAR [EX-HEATER] Nishii's secret weapon for the extreme cold winter has arrived!
This is warm! [EX-HEATER] Nishii's secret weapon for the cold winter has arrived! The sea has been too cold for Nishii, who suffers from back pain, I ordered the EX-HEATER, which is sold by the X-GEAR brand. What a surprise! The WET belt is equipped with a detachable waterproof battery and heating wire. It's designed to be used while surfing! I immediately charged it and tested it by wearing it around my waist. I haven't used it in the ocean yet, but it's amazing!!! This would be perfect in the ocean, but while working, I sweat and get so hot that I can't wear it for long periods of time. According to the manual, it takes about two hours to fully charge and will provide heat for about two hours. But I had to bear the heat for the test... How much time will be spent working at the shop today? When I tried it... I had a fever for about 2 hours and 30 minutes! After that, the battery suddenly died and it stopped keeping the heat. It's an AUS outlet, so you can use it when traveling abroad. Adapters for different countries' power outlets are also included. Of course, Japan is OK too! As you can see, the battery size is almost the same as the iPhone, just a little smaller. It's a little thicker and more compact than I expected. Once the battery is charged and the waterproof cord is connected, it starts to generate heat. The retail price for the complete set is ¥36,750. The price is not much different from buying underwear, boots, and gloves. This EX-HEATER is worth more than its price tag every time you use it. There's no doubt that every winter surfing will be more comfortable. It is especially recommended for those who suffer from back pain. Apparently, only a small amount has been released into the Japanese market this season. Even Love Surf was only able to secure a few, If anyone wants one, please let me know right away! Well, I'll try wearing this and surfing soon. Please wait for the report!
Learn morePlacebo [SCORCHER] Flexlite 2 images revealed for the first time!
Placebo [SCORCHER] Flexlite 2 (softflex) ¥118,000 including tax Images revealed for the first time! 5'8" x 18 1/4" x 2 1/8" (172 x 46.3 x 5.4 cm) 50-60kg 5'9" x 18 1/2" x 2 3/16" (175 x 47.0 x 5.55 cm) 55-65kg 5'10" x 18 3/4" x 2 1/4" (178 x 47.6 x 5.7 cm) 60-70kg 5'11" x 19" x 2 5/16" (180 x 48.3 x 5.85 cm) 65-75kg 6'0" x 19 1/4" x 2 3/8" (183 x 48.9 x 6.0 cm) 73-80kg 6'2" x 19 1/2" x 2 1/2" (188 x 49.5 x 6.2 cm) 78-88kg What is Flexlite 2 (softflex)? This is only available on the 2010 Placebo [SCORCHER]. It's a new material. The difference with FLEXLITE is that the deck is designed to fit the user's stance like a POLY board. It was designed to get dented. The basic core (EPS) and the board's appearance are the same, Instead of the PVC sheet used in FLEXLITE, We use a fiberglass sheet called "BI-Accel." It is stronger and less likely to crack or break than regular poly boards. When you step on it, you feel the softness and it responds better than PVC sheets. I feel it a lot. Even if it does get dented like a POLY board, it is less likely to crack and will last longer than POLY. FLEXLITE has a stronger surface, but it is not suitable for the stance preferred by professionals and advanced players. The greatest feature of this material is that it can be made into indentations. Reservations are now being accepted! For reservations with delivery expected at the end of March, Call us at 03-3732-5532 or http://www.luvsurf.co.jp/contact/contact.php Please apply using this form! Please feel free to use this form to inquire about sizes!
Learn moreKolohe's surfing in "Scorcher" is a feat!
We're always open! Open 24 hours! You can shop at Love Surf WEB★STORE from your mobile phone! You can easily use it even when you're out and about, so please feel free to use it from your mobile phone! "Chris Ward" "Kolohe Andino" "Luke Davis" Jeremy Carter and his friends perform in knee-high waves. Professional surfers' surfing is a world tour contest, It's not all about filming in Indonesia. My real daily life is enjoying small waves with friends at my usual home break. The point of this video is T-Street, This beach break point is located next to the south side of the San Clemente Pier. Kolohe said, Of course it's Scorcher! This is our staff member Daisuke, who was photographed at T-Street last year, also at T-Street! I recommend "Scorcher"! Kolohe's surfing is truly an act! Love Surf is recommended! Check out Scorcher's special page here! http://www.luvsurf.co.jp/camp/scorcher.html Stock boards are arriving one after another! http://www.luvsurf.co.jp/topics/new.html#1-12
Learn moreProfessional board for CHRIS WARD "F1-STB" now on sale!
Have you all registered as members yet? Love Surf WEB ★ STORE http://www.luvsurf.co.jp/xcpage/i,shop/ Although we have just opened, we have received many orders from you all. thank you! The store's top recommendation! From the professional boards that LOST provides to its team riders, This is one of the few bottles I was able to get specially from Mayhem. Professional board for Chris Ward (For CHRIS WARD) "F1-STB" #CWPRO3 6'0" x 18 3/4" x 2 5/16" (180 x 47.6 x 5.85 cm) 68-78kg This board was shaped when a board made for Chris Ward was shaped, so of course the board model, size, fin specifications, and even the shape signature are the same professional-grade board as a Chris Ward. This is a special board that is rarely available new, as it was shaped from carefully selected blanks that Mayhem has selected and stored for the team from the many blanks distributed to LOST by blank manufacturers. The deck surface of the board is wrapped in one layer of cross and the tail stance area is wrapped in two layers, making it an ultra-lightweight finish for competitors that is popular with professionals. Chris Ward is 183cm tall and weighs 80kg, but we recommend that advanced Japanese surfers weigh around 73-78kg, and intermediate surfers weigh around 68-73kg to ride this board. ■Professional board for Chris Ward (For CHRIS WARD) LOST "F1-STB" model Material: Polyester / Weight: 2590g SQUASH TAIL/ TRUEAMES TRI-ON FIN #CWPRO3 6'0" x 18 3/4" x 2 5/16" (180 x 47.6 x 5.85 cm) 68-78kg ¥138,000 (excluding tax) / ¥144,900 (including tax) And WEB★STORE is a place where you can find us on your way to work or when you go surfing on your days off. You can now shop from your mobile phone so you can easily use it on the go, so please feel free to use it! Here is the QR code!
Learn more