Blog
This is a recommended LOST mark. Please refer to it when ordering a custom item.
This is today's LOWERS. San Clemente is experiencing flat waves that are only around once a year. This is Salt Creek. There are no waves and no one is surfing. It's rare, but the low pressure that brought snow to Japan yesterday is forecast to bring Bixell over the weekend, so I'm looking forward to it. In the newly expanded silkscreen room at the LOST surfboard factory, The new Luvsurf sticker edition was finished. We are now able to print the laminate marks that go on these lost surfboards in-house. New for 2013, you can specify it when ordering custom. Check out the photos of recommended marks in action. RUST OLIVE LEMON LIME BURGANDY Please refer to this when placing a custom order. After that today, I went to LOST Surfboards and ordered stockboards such as the popular ``SUB-DRIVER-JP''. These are expected to arrive as early as March or April.
Learn moreExplaining the recommended fin settings for the 5'11" SUB-TABLET!
Due to the popularity of the 5'11" SUB-TABLET "WARd5" fin giveaway, we have completed an emergency additional 50 sets! Due to the popularity of the "WARd5" fin giveaway, we have quickly produced 50 sets! This is it! We are now offering this as a gift to everyone who purchases the limited edition of 100! We will explain the recommended fin settings for the 5'11" SUB-TABLET model. For quick and loose riding in normal conditions (knee to chest), a lightweight and high-performance board is included as a gift. ↑↑↑We recommend the 'WARd5' quad setting as shown in this photo. In conditions where the size is larger, such as chest to overhead, ↑↑↑We recommend a 5-fin setup with all 'WARd5' fins attached, as shown in this photo. Furthermore, when you want to drive the arc of the turn more strongly in conditions such as overhead or powerful deep waves, We recommend the "GMB" 3-fin set, which comes with the board as shown in the photo. In small onshore waves with no shoulder, like in this photo, you can attach a quad back fin to the center, You can also make it very flexible and ride it in a spinning motion ↑↑↑It's also fun to play around with fin settings like this, as shown in the photo! This is a limited edition of 100, and comes with a free "WARd5" fin. Click here to see the 5'11" SUB-TABLET model in detail! http://www.luvsurf.co.jp/models/placebo/sub-tablet If you are ordering online, you can purchase it here. http://www.luvsurf.co.jp/store/11502/
Learn more"FU・WAX" is selling well! If you haven't tried it yet, please give it a try.
"FU・WAX" is selling well! If you haven't tried it yet, please give it a try. Kelly and other WCT players say they can't use any other wax anymore after experiencing its high-performance adsorption power. Try to dramatically reduce wipeouts. This photo was actually requested by Kelly Slater, who came to Hawaii last year. This is a photo of the wax that "FU・WAX" sent to Kelly. "FU・WAX" is a high-quality wax that is 100% handmade in Brazil. This is a rare item that has been carefully and faithfully handcrafted by FU in Brazil, one by one. It is more expensive than waxes currently on the market, but one bottle can be used 6 to 10 times if you apply it before each surfing session. The grip effect of the wax is very different from previous waxes and lasts longer, so some people say that there is no need to apply it every time. This wax has such excellent grip performance that you will be convinced once you use it, that almost everyone who has used it has commented that they don't feel it is expensive. Please throw away any concepts of WAX you have used up until now. This is the world's best surfing wax used by Kelly himself and other WCT surfers. There is currently no wax that offers better performance. "FU・WAX" is a top coat wax. Be sure to apply a base coat, and it's best to apply it thinner than previous waxes. There is no need to apply a thick layer of wax to improve grip like with previous waxes. If stringy residue appears, there is no need to apply any more. A thin layer is best! I tried applying it over colored wax and it worked without any problems! Of course, Lost's first TEAM rider, Strider Wazulski, is also using it! It has also started being sold at Luvsurf stores. http://www.luvsurf.co.jp/store/11847/ You can also purchase it via mail order here.
Learn moreThe DRIVER model is now available in resin-stained colors! It's semi-dry and heavy, yet maintains comfortable paddling performance!
Julian Wilson-inspired JW coloring design stockboard now available! This is a cool board with a transparent tint color finish that cannot be achieved with an airbrush. For more information about the LOST "DRIVER" model, please click here. http://www.luvsurf.co.jp/models/lost/driver JW also rode at the 2012 WCT Harley PRO! [vimeo]http://vimeo.com/51197165[/vimeo] LOST "DRIVER" Polyester / Resin Tint Color Specifications SQUASH TAIL/TRI FIN-FCS/ Includes three FCS Green Flex GMB fins ¥138,000 (excluding tax) / ¥144,900 (including tax) #110675 5'9" x 18 1/4"x 2 1/8" (175 x 46.3 x 5.4 cm) 55-65kg 23.5cl http://www.luvsurf.co.jp/new/4961 #110647 5'10"x 18 1/4"x 2 1/8" (178 x 46.3 x 5.4 cm) 55-65kg 23.8cl http://www.luvsurf.co.jp/new/5009 #110646 5'10"x 18 1/4"x 2 1/8" (178 x 46.3 x 5.4 cm) 55-65kg 23.8cl http://www.luvsurf.co.jp/new/5011 #110648 5'10"x 18 3/8"x 2 3/16" (178 x 46.7 x 5.55cm) 58-68kg 24.62cl http://www.luvsurf.co.jp/new/5032 #110650 5'11"x 18 3/8"x 2 3/16" (180 x 46.7 x 5.55cm)60~70kg 24.99cl http://www.luvsurf.co.jp/new/5097 #110651 5'11"x 18 3/8"x 2 3/16" (180 x 46.7 x 5.55cm)60~70kg 24.99cl http://www.luvsurf.co.jp/store/12848 Among the many LOST squash tail models, this is a high performance model with a little buoyancy. Even if your body is heavy wearing a semi-dry life suit, you can still paddle. [vimeo]https://vimeo.com/47772098[/vimeo] This is a collection of riding clips of Julian Wilson, who won the 2012 US-OPEN. In accordance with the wave quality of HB, which is not good at all, take off as early as possible and speed up the timing of the turn, It was to gain speed and fly in the air section. Please also see the explanatory photos on this blog. http://www.luvsurf.co.jp/24sblog/?p=14696 Be sure to try riding the DRIVER model by watching these riding videos of Julian Wilson. Nishii has also recently started riding the DRIVER model, which allows him to maintain comfortable paddling performance like in the summer, even when he feels heavy wearing semi-dry clothes. This is his fourth Super Swallow, from the early model to the latest squash tail model. We recommend the resin TINT color board, but we also have the same size clear board in stock, so be sure to try out the DRIVER model. It's currently the most popular model among LOST's custom orders, both among pros and users around the world. To see the full stock board, click here. http://www.luvsurf.co.jp/models/lost/driver#stockbox
Learn moreANCHOR team "GORKIN"'s latest riding video "Gorky Park" 15 minutes released!
ANCHOR team's "GORKIN"'s latest riding video "Gorky Park" 15 minutes released! He was the first in the world to perform this backside 360 degree maneuver, which was named the Gokin' Flip. The place where the famous Aaron "Gorkin" Komikan has recently taken up residence. A 15-minute compilation of the latest riding footage from Costa Rica, "Gorky Park," has been released. The water temperature is warm, so I'm wearing Anchor's UPF50-SURFJACKET! http://www.luvsurf.co.jp/goods/anchor2.html This is a recommended product for trips to Bali or tropical destinations overseas. There's even an anchor sticker on the MAC BOOK PRO! So, enjoy "Gorky Park." [youtube]http://youtu.be/r3SAijIMOT8[/youtube]
Learn moreThe corkboard "C3" specification is the ultimate premium LOST surfboard!
C3 specification (CORK board) CORK-CARBON-COMPOSITE You can see the special C3 stock boards that have arrived here. LOST "COUCH POTATO" C3 LOST 『V2-ROCKET』 C3 LOST 『SUB-DRIVER-JP』 C3 C3 specification (CORK board) CORK-CARBON-COMPOSITE Only one stock board of each model and size is imported, making this the ultimate premium, yet highly durable and high-performance special LOST surfboard. Be sure to add this to your board lineup. This is the ultimate premium LOST surfboard, with only one stock board of each model and size imported! This board has the potential to be capable of high-speed surfing, which is surprising from its appearance. *High-strength and ultra-lightweight carbon fiber rails * Vacuum shrink glass method *2.1 oz EPS foam core *Cork deck *Hand print mark By combining these luxury parts, This is a rare surfboard that has been carefully and time-consumingly produced, and it has a great texture and a luxurious, high-end appearance. Above all, Nishii can confidently recommend this product because it uses cork. Its soft flex allows you to ride waves smoothly and easily gain speed. Also, since the cork itself has buoyancy, the board will have a slightly higher buoyancy than the CL value printed on it. I should also mention that paddling and takeoff are faster than with a POLY board. Only one of each model and size is available, making this a rare find that will impress even collectors, with its beautiful finish that beautifully combines the natural material of cork with the high-tech material of carbon. We will now explain in more detail about CORK boards, which have finally begun to be imported into Japan. This LOST "Cork" surfboard is This is a very rare board that has been made with a great deal of time and effort. 2.1 oz. strong EPS foam core A special epoxy resin is used to create a dense, strong surface. "Cork" is attached to the deck and carbon is wrapped around the rails. We use a vacuum-sealing machine that carefully creates a vacuum-packed state over 72 hours. All materials, including the epoxy glass layer, are absorbed into EPS foam. A major feature of this board is that the deck is covered with approximately 5mm thick cork. Therefore, the front of the board deck has a traction effect, and the front and rear feet Since it is non-slip, there is no need to wax this board. All rails from nose to tail are lined with high strength and ultra-lightweight carbon fiber. The entire board is encased in a carbon fiber frame, giving it a skeletal structure similar to that of a tennis racket. After sanding the joint between the carbon rail and the cork, Decorated with black pin lines, it has a beautiful and luxurious appearance. In addition, the carbon rails are given the unique luster of epoxy by applying an extremely thin hot coat and then polishing it. The markings on the bottom side are the same as those on a regular board, The mark on the deck side is a mark that has been hand-burned into the cork. Naturally, the leash plug is also beautifully built in. It also features MAYHEM's handwritten pencil signature and board dimensions. The official import mark developed for Japan will also be included on the bottom tail. The board itself is very light. The ride feels springy thanks to the soft flex of the EPS core. This is a bouncy board. It will appeal to those who prefer a softer flex like the FIVER-FLEX and Placebo-FLEXLITE/FLEXLITE-TURBO from the past. You can use the flex to gain speed even on flat sections, so it is a fast board that allows for light surfing and is better suited to beach breaks with small waves. Below is an explanation of the riding movie. Luvsurf TV:LOST "RNF-EVOLUTION" C3 Spec: Shaw Kobayashi Rider: Shaw Kobayashi Board used: LOST 5'5" RNF-EVOLUTION C3 (CORK-CARBON-COMPOSITE) FILM: Hayato Masuda EDIT: TABRIGADE FILM I interacted with several sample factories, We took the final sales version of the board to a point break in Mexico, This is a riding clip from when SHAW did a test ride. SHAW's power turn extended further forward than usual, The front side thrust turn at the top is executed beautifully. The light turning of the board, The C3 material is characterized by its ability to extend turns. Here is a video of SHAW riding. [vimeo]http://vimeo.com/56448996[/vimeo] Below are photos and commentary from when Nishii was filmed riding. The C3 specification (CORK board) has a cork deck surface, so you cannot stick stickers on it like you would on a regular board. The bottom side is glassed so you can stick stickers on it like this. This photo shows Nishii heading to the ocean for a test ride on the RNF-EVOLUTION model at Salt Creek. C3 specification (CORK board) CORK-CARBON-COMPOSITE As you get on, the stance will conform to the shape of your feet, providing more grip and a more comfortable ride. Competitors prefer to have their stance marks on the board as this gives them more control. Some people take the time to leave front and back footprints on their new POLY board on land (such as carpet) before riding it. Below is an explanation of Nishii's riding movie. Luvsurf TV:LOST 『RNF-EVOLUTION』C3 Spec: Koji Nishii Luvsurf TV:LOST 『RNF-EVOLUTION』C3 Spec: Koji Nishii Rider: Koji Nishii Board used: LOST 5'5" RNF-EVOLUTION C3 (CORK-CARBON-COMPOSITE) FILM: Hayato Masuda EDIT: TABRIGADE FILM There was some time before takeoff on some rides, This is the latest model of the RNF, featuring the distinctive flip nose design that takes into account the movement during pearling and turning, with the tip of the Lancer Evolution curved up sharply, making it extremely effective. It is made with a 2.1 oz EPS foam core and vacuum-glazed with great care and time. The carbon rails and cork deck give it a luxurious look, and its performance is something we can confidently recommend. The deck is covered with cork, making the board itself the softest flex in LOST history. The flexible flex means that when you turn, the rails of the board don't bite into the wave. In this video you can see how the board turns without stalling. Please take a look at the riding video of Nishii below to see how he effortlessly performs lip actions in succession. [vimeo]http://vimeo.com/56407723[/vimeo] The C3 specification has buoyancy in the cork itself, so it has slightly more buoyancy than the CL value printed on the board, which means that paddling and takeoff are faster than with polyboards, for example. This is also a rare collector's item, with only one of each model and size available. The beautiful finish, which is a perfect blend of natural cork and high-tech carbon, has a genuine presence. You can see the special C3 stock boards that have arrived here. LOST "COUCH POTATO" C3 LOST 『V2-ROCKET』 C3 LOST 『SUB-DRIVER-JP』 C3 C3 specification (CORK board) CORK-CARBON-COMPOSITE Only one stock board of each model and size is imported, making this the ultimate premium, yet highly durable and high-performance special LOST surfboard. Be sure to add this to your board lineup.
Learn moreWe are now selling the used board actually used by Brad Simpson!
We are now selling the used board actually used by Brad Simpson! If any of them fit your size, it's a great deal! The board I usually ride is about 5'9" to 5'11", Those who ride boards with a thickness of about 5.55 to 5.85 cm, This board is longer than usual and can be ridden in big waves, deep waves, and for overseas trips! LOST 6'1/2" "WHIPLASH-TB" POLYESTER specification. http://www.luvsurf.co.jp/used/4954 A stylish WCT rider from California with a cool yellow self-painted look This is the used board actually used by Brad Simpson. This board has been completely repaired and is still rideable. LOST『WHIPLASH-TB』POLYESTER / SQUASH TAIL / 3FINS /FUTURE FIN ￥38,000 tax included Condition B #106450 6'1/2"x 18.63"x 2.32" (184 x 47.3 x 5.85 cm) 63-75kg 27.07cl LOST 6'0" CM-PRO POLYESTER specification. http://www.luvsurf.co.jp/used/4942 This used board, originally used by California's stylish WCT surfer Brad Simpson, features a cool orange self-painted board. It's listed as a CM-PRO model, a secret MAYHEM model with slightly more buoyancy than the Whiplash-TB favored by Calisser Moore. This is a very nice bargain board. LOST『CM-PRO』POLYESTER / SQUASH TAIL / 3FINS /FUTURE FIN ￥69,000 tax included Condition A #101791 6'0"x 18.75"x 2.25" (183 x 47.6 x 5.7 cm) 63-75kg 26.51 cl LOST 6'1/2" "WHIPLASH-TB" POLYESTER specification. http://www.luvsurf.co.jp/used/4934 A stylish WCT player from California with a cool green self-painted look This is a used board that was actually used by Brad Simpson. It's a beautiful board that can still be ridden. LOST『WHIPLASH-TB』POLYESTER / SQUASH TAIL / 3FINS /FUTURE FIN ￥68,000 tax included Condition A #106448 6'1/2"x 18.63"x 2.35" (184 x 47.3 x 5.9 cm) 63-75kg 26.54cl LOST 6'0" "WHIPLASH-TB" POLYESTER specification. http://www.luvsurf.co.jp/used/4925 A stylish WCT player from California with a cool green self-painted look This is the used board that Brad Simpson actually used. It's in very good condition. LOST『WHIPLASH-TB』POLYESTER / SQUASH TAIL / 3FINS /FUTURE FIN ￥78,000 tax included Condition A #106449 6'0"x 18.75"x 2.25" (183 x 47.6 x 5.7cm) 63~75kg 26.82cl We have also stocked a number of other bargain boards in the used board section, so please come and check them out. Check to see if there's a good deal on a board that's right for you. http://www.luvsurf.co.jp/board/used_stock.html [For customers who wish to purchase a used board via mail order] Please choose one of the three payment methods below and call us at 03-3732-5532 Or, please apply using this contact form. http://www.luvsurf.co.jp/contact.html 1. Shipping is possible with cash on delivery + 840 yen. 2. Customers who wish to pay by credit card Please have your card ready and call us at 03-3732-5532. 3. Customers who wish to make a bank transfer After placing your order, please transfer the amount to the bank account/transfer details we will inform you of by phone or email. Please note: We do not sell used boards on our web store. [Luvsurf business hours (open all year round)] ■Weekdays 12:00 PM - 9:00 PM ■ Sundays and holidays 2:00 PM to 8:00 PM
Learn moreTake a look at the three different sizes of foam core used in the AUROLA fins.
Take a look at the three different sizes of foam core used in the AUROLA fins. When you flip the inside of the fin over, you can see that it has multiple layers like this. The base of the fin is made of multiple layers of cloth. It is usually inside the building, so you probably won't have a chance to see it in person, but This is what foam core looks like. Please take a look at our three sizes of foam core. ↑Large, when compared with the same area, The foam section is the largest, making the fin the lightest and most flexible. ↑Small is The foam section is the smallest, thinnest, and most abundant, making the fin lighter and providing the greatest hardness. ↑ As the name suggests, the medium is between the large and small in weight and has an intermediate flex. Foam core is a flexible material that allows the fin to be lightweight. This is used in all AUROLA fins, so all AUROLA fins are lightweight. For more information on AUROLA fin types, please click here. You can purchase AUROLA fins here.
Learn moreThe sold-out "AUROLA CARBON5" fin set is now in stock!
AUROLA fin's best-selling model! The sold-out "AUROLA CARBON5" fin set is now in stock! This is the best 5-fin set recommended for those who own a 5-fin board. The sides and center are longer to assist in driving turns, The side fins in particular are designed to be ideal for use as quad side fins on wide outline boards. The quad's back fins are also long but slender, so they allow you to ride with a feeling of reducing the looseness of the quad, resulting in a setting that is easy to handle and does not wobble. The base is covered with black carbon for maximum hardness, the middle is made of a small core for medium hardness, and the tip is made of a large core for softness, which forces the board to flex and allows the fin to rebound, extending the turn. Of course, the AUROLA 5 fin set can also be used on tri-fin boards for larger waves than usual, making it a very useful and popular choice for those who own both quad and tri-boards. Lost, of course, Placebo "TABLET" Placebo 『RNF-EVOLUTION』 Placebo "FISHQUEST2" Placebo "RIPQUEST" Placebo "ROCKET" Placebo "POWERQUEST" Placebo "AIRQUEST" Placebo "BLACK SHEEP" It can also be used in conjunction with various pre-facelift models such as these, so please give it a try. If you are far away, you can purchase it here, so please give it a try! The physical store will open tomorrow, Saturday, January 5th, from 12:00.
Learn more