Skip to content

世界中で優秀な成績を刻み続けるLOST最強コンペモデルがアップデイトし更に高性能に!

      • ドライブ性能やコントロール性能がアップしたNEWバージョン
      • パドルスピードまでアップしたスーパーハイパフォーマンス
      • 4ozボランクロステールパッチ搭載、フレックスに優れ加速性が向上
      • 既にワールドツアー2勝、他にも優秀な戦歴を刻み続けているシリーズ最新作
      DRIVER3.0...the ultimate driver machine.

      This is the culmination of two years of fine-tuning from the Driver 2.0 by our elite-level team riders. Since the launch of the Driver 2.0 in 2019, our team has constantly evolved, striving to always have an edge when competing with the world's best surfers. The design adjustments represent a progression and evolution from the Driver 2.0; it's no longer the same model. It was unveiled to the public at the 2022 "Stab In The Dark" event, where Jack Robinson narrowly missed out on the win, coming in second. Further refinements have since made the Driver 3.0 an exceptional, ultimate driver machine.

      Nearly every top athlete surfer we work with has claimed the 3.0 version is their best board by early 2022. Griffin Colapinto rode the DRIVER3.0 to two WCT wins in Portugal and El Salvador on the 2022 WSL World Tour.

      The DRIVER3.0 is a direct replica of the magic board that Griffin Colapinto used to win two World Tour titles.

      The response and praise from all our talented team riders, veterans like Kolohe Andino, Yago Dora, and Ian Crane, as well as younger riders like Eli Hanneman, Crosby Colapinto, and Cole Haushmand, has been so positive that we decided it was time to move on and make the new Model 3.0.

      The DRIVER3.0 is an evolution of its predecessor, the Driver2.0, with a slight tail rocker and a slightly deeper single concave, incorporating a double concave at the rear. More concave means more lift and rail line rocker. More lift means faster speed. More rail rocker means more carve, resulting in tighter radius turns. The outline hip line between the feet has been narrowed from the front stance to the back stance, adding grip and driving performance and stability. The tail design allows for hard pushes under the back stance at a pro level, and is designed to give you confidence when surfing in the pocket.

      To balance these design elements—updated tail rocker, narrowed hip outline, and Hyperrail Rocker—we added a little more. The forward outline width and forward foil volume provide more forward volume for front-foot glide and a more responsive drive. The DRIVER3.0 is thicker along the stringer line (for paddle power and drive) for faster speeds, but the high-angle "Vee" deck removes volume to maintain control at speed, allowing for rounded, thin rails for more control.

      Griffin rides a 5'11 x 28.50 liters. Yago rides a 5'11 and 6'0 x 29.50 liters. Kolohe and Crosby fall somewhere in between, similar lengths but with a 29.00 liter capacity. The DRIVER3.0 is a product of high-level professional surfing. It was developed based on input, testing, and feedback from LOST teams and numerous developers around the world.

      The DRIVER series' competitive success, including victories on the World Tour and in the Olympics, is proven by the highest-level surfers in the U.S. and around the world. The dimensions and volume have been slightly increased from previous years, providing top pros with a responsive ride that maintains drive and glide. At the same time, the boards offer increased paddle speed, increased ease of riding, and more forgiveness, allowing casual surfers to ride the same board the pros ride.

      The latest addition to LOST's masterpiece DRIVER series, "DRIVER 3.0," will finally be released in Japan in spring 2023 for those seeking professional-level high-performance surfing.

      YouTube 動画

      ロストサーフボードを正規総代理店ラヴサーフにてUSAカスタムオーダーしませんか?

      西井プロやLOSTサーフボードを熟知した専任スタッフがいるラヴサーフへ、納得するまでとことん相談して、サイズやモデルはもちろん、メイヘム本人がシェイプを行いフィニッシュする、あなたの名前とメイヘム本人のサインがボードサイズと共にフォーム内部に書き込まれた世界に1本のみの、こだわりのカスタムボードをオーダーしてみませんか?
      そしてなんと言っても正規輸入ボードは全て日本へ輸入後、国内工場にて再度検品整備加工してからお客様へお届けしております。正規輸入ならではの高品質LOSTサーフボードを安心してUSAカスタムオーダーにてご購入して頂けます。

      納期

      オーダー申し込み確定日より、約4ヵ月を基準にして前後1ヶ月が目安です。『EPS・EPOXY素材』のボードは、約5ヵ月を基準にして前後1ヶ月が目安とさせていただいております。各素材ともオーダー時期やオーダーされたモデルの仕様やデザインの指定により、前後1~2カ月の誤差が出ることがありますので事前にご了承をお願いいたします。


      通常4ヵ月間前後ぐらいですが現在混み合っており、約6ヵ月以上のお時間をいただいておりますので、お早めのカスタムオーダーをおすすめしています。

      オーダーに関する注意

      納期のお問い合わせを頂いても、ボードが出来上がり、輸入税関検査後でないと確実な納期の確定のご返事ができませんことを予めご了承ください。

      USA製作はカスタム商品の特性上、完成後作り間違いなどにより、再制作になる場合などもございますので、予定納期の遅れについてのクレームは一切お受けできませんので事前にご了承をお願いいたします。

      オーダー用紙にご注文する内容をご記入し、お客様ご確認後に代金をお支払い頂いた時点で「オーダー確定」とさせていただきます。

      「オーダー確定」後のサイズやモデルオーダー等の注文の内容変更はできませんので、お客様は、オーダー用紙に記入されている注文の明細を必ず再度ご確認の上、オーダーを確定しお支払いを完了してください。

      オーダー料金

      USAカスタムオーダー料金はボード代プラス、別途¥33,000(税込)となります。

      オーダー方法と手順

      5ステップのご案内。
      全てのお客様へ、西井プロや専任スタッフがご相談を受け最後までご対応させていただきます。

      1. まずはご連絡ください

      まずは『サーフボードオーダーをご希望』ということをお知らせください。
      お電話(03-3732-5532)または、お問い合わせフォームからお名前や、ご連絡先をご連絡ください。

      2. ヒアリング

      現在お使いのボードや、サーフボードオーダーに必要なお客様のデーター等を詳しく、お聞きさせていただきます。

      3. サイズとモデルの決定

      ボードのサイズやモデルを、西井プロや専任スタッフにご相談の上、確定してください。

      4. オーダーの確定

      オーダー用紙にご注文する内容をご記入し、お客様ご確認後に代金をお支払い頂いた時点で「オーダー確定」とさせていただきます。
      オーダーを確定しお支払いを完了してください。
      お支払い方法は、銀行振込やクレジットカードもご利用して頂けます。

      5. 商品のお渡し

      あとは、オーダーしていただいたサーフボードが出来上がるのをお待ち頂くだけです。できあがりまで楽しみにお待ち下さい。

      オーダー用紙

      下記リンクのオーダー用紙(PDF)をお使いになられますと便利です。

      オーダー用紙をダウンロード

       

      ロゴマークサンプル

      USAカスタムオーダー時には、こちらのLOSTロゴマークからお選びいただきマークを入れる位置をご指定ください。



       

      マーク位置サンプル

      LOSTとMAYEMのマーク位置サンプルです。番号でご指定ください。

      *各モデルマークも1本に1つだけ入れることができますので、マークを入れる位置を指定してください。

       

      モデル ベースプライス(POLY)
      FORMULA-1
      SUP DRIVER
      SUB DRIVER 2.0
      SUB DRIVER 3.0
      3.0 STUB DRIVER
      DRIVER 3.0
      ¥198,000(税込)
      STEP DRIVER
      MOD QUAD
      ¥203,500(税込)
      SPEED DEMON
      THE RIPPER
      RAD RIPPER
      RNF'96
      BIG RIG DRIVER
      RNF'96 KINGHISH
      PARTY PLATTER
      ¥209,000(税込)
      PISCES ¥214,500(税込)
      RNF Twinzer+ '96er
      RAD ZAPPER
      MICKS TAPE SYM
      CALIFORNIA TWIN
      RNF-RETRO REVAMP
      GLYDRA
      ¥220,000(税込)
      SMOOTH OPERATOR ¥231,000(税込)

       

      オプション プライス
      USAカスタムオーダー料 +¥33,000(税込)
      レジンカラー(カラーやデザインにより変動) +¥36,300(税込)〜
      エアブラシカラー(カラーやデザインにより変動)  +¥36,300(税込)〜
      6'6"〜2インチごとに +¥5,500(税込)〜

       

      テクノロジー(素材) プライス
      EPSフォーム / EPOXYレジン +¥66,000(税込)
      LIGHT SPEED2 +¥66,000(税込)
      BLACK SHEEP BUILT +¥77,000(税込)
      DOUBLE DART(BLACK DART) +¥132,000(税込)

      ご来店にてオーダーのお客様

      ご来店が可能なお客様は、今現在乗っているボードをお持ちになりご来店ください。

      今乗っているボードの浮力やロッカーや浮力ボリューム確認させていただき、今回のオーダーへ反映させていただきます。

      ボードをお持ちになれないお客様は、メーカー(シェイパー)サイズデーターをメモしてからご来店ください。

      もしお客様ご自身のライディング映像などがございましたらそちらもお見せしていただければ、より良いアドバイスをさせていただけますので、お気軽にお持ちになりお越しください。

      LOSTサーフボードのカスタムオーダーは『USA生産』にてカスタムオーダー製作が可能です。 『MADE IN JAPAN QUALITY』ボードはカスタムオーダーには対応しておりませんのでご注意ください。


      PRICE

      ポリエスター(PU)
      ポリエスター(PU) MADE in JAPAN
      ¥ 139,900(税込)
      ポリエスター(PU)
      ポリエスター(PU) MADE in USA
      ¥ 198,000(税込)
      DOUBLE DART
      DOUBLE DART MADE in VIETNAM
      ¥ 286,000(税込)

      INFORMATION

      サイジングはお気軽にお問い合わせください

      ご相談・お問い合わせは以下のフォームよりお気軽にお寄せください。