Blog
FU WAX is a suction cup-like surf wax that has WCT athletes hooked!
FU WAX is a suction cup-like surf wax that has WCT athletes hooked! Kelly Slater also made an incredible high-speed spinning air at the WCT contest in New York, which has the highest prize money ever. This is the wax I used when I scored 10 points in one maneuver and have been using ever since! [youtube]http://youtu.be/P9VdnvKRaMA[/youtube] This is said to be the best air of 2011, and your feet are attached to the board! In 2012, he also won the final heat of the Rip Curl Pro in Bells, Australia. [youtube]http://youtu.be/ao36RvLJkIc[/youtube] He scored 10 points with this further evolved rotation air. This is the wax that Kelly and many other top competitors, including WCT athletes, actually use! Everyone loves its grip! Handmade in Brazil using a top-secret recipe. The only person who can make this wax is FU from Brazil. "Please use FU WAX as a top coat, applying it more thinly than usual." What makes it so different is that it sticks to your surfboard like a suction cup, increasing your grip. It's a completely different wax, so much so that you'll never want to use your old wax again. Give it a try; its sticky adhesion is unmatched by any other wax. Anyone can enjoy better grip and more confidence in their surfing with just this one wax. [vimeo]http://vimeo.com/56305485[/vimeo] The FU Wax base coat is currently sold out. It doesn't matter what brand it is, but we recommend applying a harder base wax thinner than usual. *FU Wax's base coat also has excellent performance, so we recommend you use it when it arrives. As shown in the photo, flatten the wax. Until now, I had to apply wax with a lot of force, creating lots of bumps to prevent slipping, but FU and WAX are different substances that absorb water, so apply them thinly several times and when threads start to appear, it's done. A thin layer of FU WAX is enough to be effective. If you apply it flat, you won't waste too much, so you can use it more times. Try touching the wax on your board in the ocean and comparing it to the wax on a board that has been applied with other waxes. When you press the deck of a board that has been coated with FU WAX against your palm, it will stick to your palm like a magnet or a suction cup. Even if you can't do air, try pulling out as hard as you can to see the effect. I can feel the board sticking to my feet more than ever before. I often look at the young surfers these days, especially the talented Brazilian surfer Medina, "It feels like the board is attached to my feet!" You might say this, That's right! They stick together because they use FU WAX. The video below shows the next generation of Brazilian skaters following Medina, who qualified for the 2013 ASP-WCT at the age of 17. Flipe Toledo's backside air full rotation! [youtube]http://youtu.be/PIFgYZ2q3K4[/youtube] This video demonstrates the performance of FU WAX, performing a backside air full rotation with unprecedented height, distance, and perfect landing. And for another one, check out the video below. The next generation of surfing by World Junior Champion and sharp natural footer, Kaio Iberi, also uses FU Wax! [vimeo]http://vimeo.com/46970605[/vimeo] We have started receiving testimonials from people who have actually used "FU WAX," which is carefully handmade in Brazil! *The suction power was so strong that the board stuck to my feet! *You cannot use other waxes! *I could feel the effects of FU WAX even when I applied a thin layer over the wax I had been using. *It's a luxurious, handmade product that's really comfortable to use! *I was surprised how much one wax could change my surfing! *It's amazing, it's like a magnet! *It doesn't need to be applied thickly like previous waxes, so you can use one product multiple times, making it economical. *Amazingly long life! It still gripped well even after the second round, without needing to be reapplied! We received many wonderful comments! We encourage everyone to try FU WAX. In addition, Brazilian FU WAX, which is handmade using a top-secret recipe, is still produced in limited quantities and is extremely difficult to obtain. Please be aware that similar products have already begun to appear in the United States. FU WAX is a handmade product, Unlike other manufacturers, we cannot mass produce products that can be used by all surfers around the world, Counterfeit products have also appeared that are likely to be bought by people who have never seen or used the product before. Please see the photo below. Below is the real thing. The one above is a fake, made by peeling off the label of another manufacturer's wax and pasting a counterfeit label on top. (The contents were SEXWAX) --------------------------------------------- Former World Champion Martin Potter, also known as "POZZ," also uses FU WAX. This is a scam! Try out the grip that the wax claims to provide, just like a foot strap. Kolohe Andino Be sure to try out this amazing grip, which even WCT athletes will find unusable with other manufacturers. Like them, you'll never want to use any other wax again! Dane Reynolds I actually got to see the email from Paulo of FU WAX USA. Brett Simpson We received many orders from individual WCT/WQS competitors, including Kelly. John John Florence Julian Wilson Luvsurf is now the first to offer this product for purchase through their online store! ★Purchase here >> http://www.luvsurf.co.jp/store/11847/ ◆『BASE』 All season (primer only) *Guideline ◆"TROPICAL" Midsummer (Water temperature above 21°C) Board Shorts - Spring ◆『WARM』 Summer (Water temperature 18~21℃) Seagull ~ Jersey Full Suit ◆『COOL』 Spring, Autumn (Water temperature 14~18℃) Jersey full suit ~ Semi-dry ◆『COLD』Winter (water temperature below 14℃) Semi-dry to boots/gloves FU・WAX is highly resistant to dissolution in seawater, so it maintains its grip and adhesion for a longer period of time than ever before. This is an excellent, high-performance 3D surf wax that is also resistant to staining on wetsuits. --------------------------------------------- ↓Please also check out the latest information about ``FU WAX'' here. http://www.luvsurf.co.jp/24sblog/?cat=41 We are also looking for surf shops that can sell FU WAX, so please feel free to contact us. Please contact us at 03-3732-5534 or via the form below. http://www.luvsurf.co.jp/contact.html ---------------------------------------------
Learn moreHere are some photos taken by photographer Masuda, who accompanied us!
Nishii is about to fly to Japan. Please take a look at the photos taken by photographer Masuda, who accompanied us. GETTO HOUSE GLASSING @ SAN CLEMENTE,CA. Power Surf Style Master Chris Ward @ South Side HB,CA. Air Reverse KEI KOBAYASHI @ LOWERS. Power Lip MASAKI KOBAYASHI @ LOWERS. Nose Landing KEI KOBAYASHI @ LOWERS. Power Carving Turn SHAW KOBAYASHI @ LOWERS. MAYHEM and Koji Nishii LOST SURFBOARDS @ SAN CLEMENTE,CA. MAYHEM and Koji Nishii @ MATT BIOLOS'S SHAPE ROOM All photos by Hayato Masuda.
Learn moreMAYHEM starts shaping up! GETTO HOUSE undercover report.
Last night's heavy rain has stopped, but the sky is still cloudy in Orange County. The waves at Salt Creek are small and there are almost no people around. When I went to the LOST surfboard factory early in the morning, MAYHEM was just starting to shape the boards. This board is by Griffin, the next generation of kids surfers from San Clemente. The model was WHIPLASH-TB. Photographer Masuda, who accompanied us, took pictures of the scene without missing a beat. This is a recent Magic Boards returned surfboard rack. Riders can simply place their board here and MAYHE will shape the same magic board for them. We also went to check out the nearby GETTO HOUSE. This is a POLY specification board of the FISHQUEST2 model. It hasn't been sanded yet and the leash plug hasn't been installed so it looks unfamiliar. All the boards look so good that I can't help but stare at them. It means your board is in the sanding room, I went to the sanding room to find it and there it was! Three Masato Yukawa PRO airbrush color boards had also been laminated and were waiting to be sanded. It looks like it will be completed within the year.
Learn moreWhat would happen if you applied wax to a cork board???
I took some photos at LOWERS this morning. In the early morning, the tide was rising and it was difficult for the waves to break, As the tide went out, the number of breaking waves increased and the peaks moved further offshore, making the waves more rideable. The FUN WAVE is waist-chest size. I tested what would happen if I applied wax to a cork board. The result is no wax needed at all. In other words, if you apply wax and then stand with the soles of your feet on the wax, you will slip. It's not working well. I analyzed that this is because the cork and wax don't go well together. Therefore, we do not recommend using wax on cork boards. This is a LOST surfboard in the resin tint color that's popular in CA recently. RC surfers also appeared, This was the fastest one... He kept hitting the air like this. KEI goes surfing early in the morning before going to school. Photographer Masuda was fully equipped and took videos and photos. In the afternoon, head to LOST Surfboards A lot of test boards for 2013 have been completed, so We immediately arranged for it to be sent to Japan. This is the carbon used in POLYESTER Carbon Tail Patch boards. A beautiful view of Salt Creek in the evening. Today was a beautiful sunny day, we were able to shoot some great clips and enjoy a beautiful sunset, making it a fulfilling day.
Learn moreWe will explain in detail about the ``CORK'' board.
We will provide detailed information about the CORK board, which will go on sale in Japan from around December 20th. This LOST "Cork" surfboard is This is a rare board that takes a lot of time and effort to make. 2.1 oz. strong EPS foam core A special epoxy resin is used to create a dense, strong surface. "Cork" is attached to the deck and carbon is wrapped around the rails. We use a vacuum-sealing machine that carefully creates a vacuum-packed state over 72 hours. All materials, including the epoxy glass layer, are absorbed into EPS foam. A major feature of this board is that the deck is covered with approximately 5mm thick cork. Therefore, the front of the board deck has a traction effect, and the front and rear feet Since it is non-slip, there is no need to wax this board. All rails are carbon fiber from nose to tail. The entire board is housed in a carbon frame, giving it a structure similar to that of a tennis racket. After sanding the joint between the carbon rail and the cork, Decorated with black pin lines, it has a beautiful and luxurious appearance. In addition, the carbon rails are given the unique luster of epoxy by applying an extremely thin hot coat and then polishing it. The markings on the bottom side are the same as those on a regular board, The mark on the deck side is a mark that has been hand-burned into the cork. Naturally, the leash plug is also beautifully built in like this. It also features MAYHEM's handwritten pencil signature and board dimensions. The official import mark developed for Japan will also be included on the bottom tail. The board itself is very light. The ride feels springy thanks to the suppleness of the soft flex EPS core. This is a bouncy board. It will appeal to those who prefer a softer flex like the FIVER-FLEX and Placebo-FLEXLITE/FLEXLITE-TURBO from the past. You can use the flex to gain speed even on flat sections, so it is a fast-moving board that is suitable for small beach breaks and allows for light surfing. Since cork itself has buoyancy, the board will have slightly more buoyancy than the CL value printed on the board, which means that paddling and takeoff will be faster than with a polyboard.
Learn more"FU WAX" has arrived and is in stock! In-store sales start on Sunday, December 9th at 2:00 PM!
"FU WAX" has finally arrived and is in stock! http://www.luvsurf.co.jp/store/11847/ As shown in the photo, smooth the wax and apply it thinly several times until threads appear. FU WAX is effective enough with just a thin coat. It will be available in stores starting at 2:00 PM on Sunday, December 9th! Even WCT players will find other manufacturers' grip unbearable. Try it for yourself. http://www.luvsurf.co.jp/24sblog/?p=16526 Self-service gas stations are the norm in California. The Middles are hit by small swells from the north. This is the point to the left of LOWER. This morning I shot a video here at Middlesborough, Long Shoulder. It is placed flat on the board and a thin layer of FU WAX is applied. Nishii is using a CORK-spec RNF-EVOLUTION with a WARd5 fin set in TRI with a small center fin. The sky was cloudy and the waves were small, so it was clear and the conditions were good for taking photos. A train running on trestles. Panoramic view of the point. A refrigerator dedicated to RED BULL at LOST Surfboards. RED BULL comes to fill up the refrigerator and support the staff's work. It will be shipped from LOST in San Clemente to Japan soon. LOST "DRIVER" model POLY boards in JW color. http://www.luvsurf.co.jp/models/lost/driver We have received many reservations for the clear LOST "DRIVER" model, so we will be stocking a limited quantity of it as stock boards and selling them in-store!
Learn more★FU WAX will be delayed from this weekend to next weekend★
Now in stock! http://www.luvsurf.co.jp/store/11847/ ★FU WAX arrival delay notice★ We had previously announced that the first shipment of FU WAX, the suction cup-like wax that has captivated WCT players, would arrive this weekend, but we are now pleased to inform you that the arrival has been delayed until next week. We are very sorry for the numerous inquiries we have received by phone and email asking if it is still available. Please wait a little longer until it arrives. The weather is typical of California, with cloudy skies in the early morning but sunny skies during the day. Check out SALT CREEK before heading to LOST surfboards. The waves are small, about knee-high in Japan. When we arrived at LOST, many more boards had been made. Model marks are printed in the print room. Here we see the print being washed clean with water. "Look, it looks nicer now," he said, showing me the RNF model mark. The marks on your boards were also printed here. This is the Luvsurf USA office room located inside Lost Surfboards. A meeting with SHAW. The waves were small this morning but looked good in the evening. To SALT CREEK, The board is a LOST 5'5" RNF-EVOLUTION model with cork. Salt Creek is a popular spot for riding the Placebo SURFSKATE model. Cameraman Masuda shot the video. I'd like to try riding this board again tomorrow!!
Learn moreNew Luvsurf TV: “SUB-TABLET” Hiroki Shirakawa
The first 50 customers will receive an AUROLA WRAd5 with free fins! As of today, December 6th, you still have time! We have received many inquiries about the "SUB-TABLET," which has been released in a limited run of 100 units. We have already received many orders, but we have also received many inquiries asking if there are any Finn gifts left, so we would like to let you know. Luvsurf TV:Placebo “SUB-TABLET” Hiroki Shirakawa Rider: Hiroki Shirakawa Board used: Placebo 5'11" SUB-TABLET FLEXLITE-TURBO FILM: Koji Nishii EDIT: TABRIGADE FILM This SUB-TABLET is a tablet with a thin, sharp rail that can also be used as a lip. The rocker, rail shape, and board outline are based on the Mayhem, a best-selling Precevo model. This is a model that has been adjusted to a performance model design for the TABLET. In this riding video, the paddle moves quickly and the takeoff is surprisingly quick. You can see that it has excellent performance that allows you to surf with quick movements. It has the potential to be used in beach break contests where the waves are not powerful, MAYHEM developed this design to suit Japanese waves. The spinning, surfboard-like design and the powerful acceleration of the FLEXLITE-TURBO. Experience the flex performance that allows anyone to easily bring out its smooth rebound performance. [vimeo]https://vimeo.com/54216960[/vimeo]
Learn moreBefore dawn, we crossed the border into Mexico.
This morning I picked up SHAW in San Clemente, and before the night ended, We crossed the border and headed to Mexico. Our destination is San Miguel. Photographer Masuda, who has been stationed in Ventura, California since last month, is also accompanying us. The new board is the Lost "DRIVER" model. The fins are AUROLA "TRIPLE RAZER". This is a commemorative photo of us meeting up with Masaki and Kei, who had been in Mexico since last week, before the session. Walk from the Kobayashi family's second house to the point. It looks Mexican. SHAW has a soft ride, is durable, easy to handle, light and has good handling. A corkboard of the RNF-EVOLUTION, which he has recently taken a liking to. This board is made from a very precious material with limited production, and only 15 units were imported to Japan in 2012. The first shipment will be available in Japan at the end of December, so if you're early, you'll be able to ride it on your first surf of the new year. It will be available in three models: RNF-EVOLUTION, UB-DRIVER-JP, and V2-ROCKET. We will be stocking five of each stockboard size, so if you are interested, please call 03-3732-5532 or Please contact us here. http://www.luvsurf.co.jp/contact.html Nishii's driver is 5'9". KEI is also a driver. The waves are head-high fan waves. We had the beach almost to ourselves, so we were able to take videos and photos.
Learn more